Quick Question!

Have you ever purchased from PartSelect.com before?

Models > EV15HEXPW0

EV15HEXPW0 Whirlpool Freezer - Overview

Get Parts and Repair Help for EV15HEXPW0

If you know the freezer repair part you need, you can browse the list of all parts on the EV15HEXPW0, or you can search by name or part description. You can also find your part by where it is located on the EV15HEXPW0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your freezer. We’ve also included any installation videos we have for EV15HEXPW0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the EV15HEXPW0

[Viewing 5 of 5]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

Order within the next 1 hr and 29 mins and your part ships today!
$28.79

Defrost Timer

This eight-hour defrost timer will replace most other defrost timers. This device acts like a clock. It continually advances and alternates between activating the cooling cycle and the defrost heater. The best way to make sure you get the correct timer for your refrigerator is to conduct a search for your model number.

Order within the next 1 hr and 29 mins and your part ships today!
$12.56

Light Rocker Switch

This light switch is triggered by the door opening and closing.

Order within the next 1 hr and 29 mins and your part ships today!
$62.75

Evaporator Fan Motor Kit

The evaporator is found in the back of the freezer. This kit comes with two mounting grommets, two sleeves (not to be used on porcelain models), two #8 mounting screws, and a push-on fan blade.

Order within the next 1 hr and 29 mins and your part ships today!
$26.70

Shelf Support Stud

This is a 12 piece kit.

Order within the next 1 hr and 29 mins and your part ships today!
$7.20

Touch-Up Paint - White

18ml

Order within the next 1 hr and 29 mins and your part ships today!
$2.80

Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.

Order within the next 1 hr and 29 mins and your part ships today!
$35.52

Light Socket Kit

The bulb is sold separately.

Order within the next 1 hr and 29 mins and your part ships today!
$5.15

Hinge Washer

Order within the next 1 hr and 29 mins and your part ships today!
$10.64

Spray Paint - 12 oz. - White

Order within the next 1 hr and 29 mins and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Unit very noisy and freezer too warm

  • Customer: Michael from Churchville, NY
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 67 of 71 people found this instruction helpful
First I removed the racks in the freezer. The rack supports on the sides lift off without tools. The evaporator cover is at the back of the freezer. 4 phillips head screws. The cover lifts up then forward to expose the evaporator, evaporator fan and duct. The duct is held by 3 hex head screws. The evaporator fan is attached to the duct with a wiring pigtail ... read more

Lights inside refrigerator not working

  • Customer: Clint from Rayville, MO
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 56 of 68 people found this instruction helpful
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again. read more

Light Would Not Go On In The Refrigerator

  • Customer: DANIEL from MINNEAPOLIS, MN
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 48 of 55 people found this instruction helpful
First I removed the old lightbulb from the socket and replaced it with a new one to confirm that the bulb was not the problem. I then pryed the socket out with a flat-head screwdriver. I could tell that the socket was anchored in its hole with clips so it was relatively easy to pry it out. Once the socket was out, I disconnected the lead wires and ordered... read more