Models > EV150FXEN02

EV150FXEN02 Whirlpool Freezer - Overview

Get Parts and Repair Help for EV150FXEN02

If you know the freezer repair part you need, you can browse the list of all parts on the EV150FXEN02, or you can search by name or part description. You can also find your part by where it is located on the EV150FXEN02 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your freezer. We’ve also included any installation videos we have for EV150FXEN02 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the EV150FXEN02 [Viewing 4 of 4]

$2.70

Screw

This screw is sold individually.

$8.37

Light Rocker Switch

$2.70

SCREW

Sold individually.

$3.96

Freezer Door Key

$40.66

Compressor Relay and Overload Kit

The overload protects a motor from overheating and the relay boosts the compressor.

$28.50

Run Capacitor

$3.96

Gate Support - Right Hand

$3.83

Screw

Sold individually.

$3.83

USE WPL 3400894

$3.66

TUCHUP

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Lights inside refrigerator not working

  • Customer: Clint from Rayville MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 36 of 43 people found this instruction helpful
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again. read more

The light switch on the refridgerator broke - no light.

  • Customer: David from Albany OR
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 16 of 25 people found this instruction helpful
Once I saw the replacement part I understood how to pry out the switch with a small screwdriver. Then just unplug the old one, plug in the new one and pop it into place.

The PartSelect site made it easy to correctly identify the correct part, it was inexpensive, and the shipping was fast.

I'm very pleased! read more

gasket had harden. frost was building up quickly

  • Customer: LESLIE from TAPPAHANNOCK VA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 10 of 13 people found this instruction helpful
the gasket peels back to reveal the approx 20 screwsholding gasket and door shelves. removed these. removed old gasket from door panel. new gasket needs to be stretched to get on door panel. align screw holes in door panel with screw holes in gasket. attached back to freezer door. this gasket did not seal securely when closing door. this gasket was ins... read more