Models > EV120FXKQ01

EV120FXKQ01 Whirlpool Freezer - Overview

Get Parts and Repair Help for EV120FXKQ01

If you know the freezer repair part you need, you can browse the list of all parts on the EV120FXKQ01, or you can search by name or part description. You can also find your part by where it is located on the EV120FXKQ01 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your freezer. We’ve also included any installation videos we have for EV120FXKQ01 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the EV120FXKQ01 [Viewing 4 of 4]

$37.17

Run Capacitor

This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.

$2.70

Screw

This screw is sold individually.

$8.37

Light Rocker Switch

$2.70

SCREW

Sold individually.

$3.96

Freezer Door Key

$2.70

Cabinet Mount Screw

Sold Individually - 2 screws needed to mount each handle.

$3.96

Gate Support - Right Hand

$3.83

Screw

Sold individually.

$3.83

USE WPL 3400894

$3.66

TUCHUP

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

My refrigerator stopped cooling and the freezer section stopped freezing

  • Customer: garth from forest lake MN
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 103 of 111 people found this instruction helpful
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck let's give her a shot ... read more

Lights inside refrigerator not working

  • Customer: Clint from Rayville MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 36 of 43 people found this instruction helpful
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again. read more

The light switch on the refridgerator broke - no light.

  • Customer: David from Albany OR
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 16 of 25 people found this instruction helpful
Once I saw the replacement part I understood how to pry out the switch with a small screwdriver. Then just unplug the old one, plug in the new one and pop it into place.

The PartSelect site made it easy to correctly identify the correct part, it was inexpensive, and the shipping was fast.

I'm very pleased! read more