Models > EST357

EST357 Caloric Range - Overview

Get Parts and Repair Help for EST357

If you know the range repair part you need, you can browse the list of all parts on the EST357, or you can search by name or part description. You can also find your part by where it is located on the EST357 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for EST357 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.52

Light Bulb - 40W

Sold individually.

$27.77

Hinge Kit - Right Side

$36.89

Oven Light

$50.09

Broil Element - 240V

$24.70

Screw

$12.23

Flourescent Lamp

$55.64

GASKET- OV

KNOB- CLOC

KNOB, SET BUTTON 1/2""

$166.05

Electronic Relay Board

This board sends information (such as temperature of oven, bake, broil) to the main control board during specific functions.

Common Symptoms of the EST357 [Viewing 1 of 22]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Replacing the bulb in the freezer side

  • Customer: Yafa (and David) from Bothell WA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 4 of 5 people found this instruction helpful
Removed the ice brucket,
Removed the light shield by releasing one screw using a nutdriver.
Replacing the bulb and reinstalled the light shield.

Your web site is one of the best and most helpfull service sites I ever used. Just wish that in the future you will ship parts overseas. read more

hard to get old one out

  • Customer: robert from chatham VA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 14 of 35 people found this instruction helpful
easy to put in read more

the broiler element burnt out

  • Customer: Deborah from Cumberland RI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 3 of 3 people found this instruction helpful
first I unplugged the stove,took the screws out of the pan that holds the element to the stove, then unplugged the element.then I plugged in the new element, then screwed the screws into the pan that holds the element into the stove. it was very easy. read more