Models > ESS357

ESS357 Caloric Range - Overview

Parts and Repair Help for models starting with ESS357

If you know the range repair part you need, you can browse the list of all parts for models starting with ESS357, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for ESS357 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Models starting with ESS357

$2.52

Light Bulb - 40W

Sold individually.

$37.18

Broil Element

$27.77

Hinge Kit - Right Side

$10.91

Clock Knob

This clock knob does not come with a tension spring insert.

$36.89

Oven Light

$50.09

Broil Element - 240V

$39.34

Bake Element - 240V 2500W

$12.23

Flourescent Lamp

$55.64

GASKET- OV

Surface Burner Knob

This surface burner knob is two inches in diameter. It is black in color and has white lettering denoting the temperature range. This knob also has a metallic trim around its perimeter. Plus, this knob is made of plastic and it will accept a 'D' shaped shaft.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The bake element burned in half, shorted out, made the lights in the house flick and burst in to a short lived flame.er

  • Customer: Michael from Winchendon MA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 5 of 5 people found this instruction helpful
Exactly:
(e.g. First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires...) read more

Broiler burned out

  • Customer: David from Lewisburg TN
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers, Socket set
  • 4 of 4 people found this instruction helpful
The Job didn’t take very long at all. I pulled the unit out and unplug it before I started the repair. I had to remove the back two access cover plates to get to the two wire leads that connect the broiler. I don’t believe there was enough wire to be able to do it all from the front side. Next I disconnected the two wires that connected it while remembering ... read more

not proper heat in oven

  • Customer: Mary from Raytown MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 4 of 5 people found this instruction helpful
ordered part -got it the next day- stalled as long as I could then opened oven removed racks-used screwdriver to loosen screws in bracket holding element on- pulled out element-used pliers to take off wires in element-thew old element as far as possible-reversed procedure to put in new element-replaced rack-received praises of all afffected-the end read more