Models > ESS307 Maytag

ESS307 Caloric Range - Overview

Get Parts and Repair Help for ESS307

If you know the range repair part you need, you can browse the list of all parts on the ESS307, or you can search by name or part description. You can also find your part by where it is located on the ESS307 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for ESS307 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.52

Light Bulb - 40W

Sold individually.

$3.96

Drip Bowl - 6"

$27.77

Hinge Kit - Right Side

$10.91

Clock Knob

This clock knob does not come with a tension spring insert.

$50.09

Broil Element - 240V

$26.62

Hinge Kit - Left Side

KNOB, SELECTOR ASSY

This selector knob is two inches in diameter. It is black in color and is made of plastic. This knob will accept a 'D' shaped shaft, and it has white lettering denothing the off, c...

SWITCH, SELECTOR

SWITCH- CL

LENS, OVEN LIGHT

Common Symptoms of the ESS307 [Viewing 1 of 22]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

oven door would fall off when you opened it

  • Customer: Arthur from Ridgewood NJ
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 5 of 7 people found this instruction helpful
left side hinge was broken. I removed 2 screws to release the old hinge and replaced it with the new hinge.
Part select.com made it easy to pick out the part from the diagram supplied on the web site. After it was ordered it arrived 2 days later. read more

Replacing the bulb in the freezer side

  • Customer: Yafa (and David) from Bothell WA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 4 of 5 people found this instruction helpful
Removed the ice brucket,
Removed the light shield by releasing one screw using a nutdriver.
Replacing the bulb and reinstalled the light shield.

Your web site is one of the best and most helpfull service sites I ever used. Just wish that in the future you will ship parts overseas. read more

the broiler element burnt out

  • Customer: Deborah from Cumberland RI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 3 of 3 people found this instruction helpful
first I unplugged the stove,took the screws out of the pan that holds the element to the stove, then unplugged the element.then I plugged in the new element, then screwed the screws into the pan that holds the element into the stove. it was very easy. read more