Models > ERT2021DARBB

ERT2021DARBB General Electric Refrigerator - Overview

Get Parts and Repair Help for ERT2021DARBB

If you know the refrigerator repair part you need, you can browse the list of all parts on the ERT2021DARBB, or you can search by name or part description. You can also find your part by where it is located on the ERT2021DARBB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for ERT2021DARBB parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.52

Light Bulb - 40W

Sold individually.

$2.87

Evaporator/Condensor Fan Grommet

$20.09

Run Capacitor

This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.

$11.93

Package of 12 Screws

$27.55

Vegetable Drawer Slide Rail - Right Side

$27.55

Vegetable Drawer Slide Rail - Left Side

$8.98

Shelf Support End Cap - Right Side

$1.94

SCR 8-18 CA HX 1/2 S

$16.66

Door Shelf Retainer Bar End Cap - Left or Right Side

This end cap can be used for the right or left side of the refrigerator door shelf or the freezer door shelf.

$2.66

SCR 10-16 AB PNT20 1/2 S

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

No power to the fan and compressor

  • Customer: Christian from Kearneysville WV
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 80 of 110 people found this instruction helpful
I have a fridge in my garage. I have found that a glass of ice water or a cold drink outside is very important to me. When I discovered melting ice dripping onto the garage floor I was very upset. I spun the fridge and found that the compressor and fan weren't starting. I got out my multi-meter and discovered that power was not making it to these compon... read more

Sticking Light Switch

  • Customer: Jonathan from Lilburn GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 34 of 38 people found this instruction helpful
I applied some tips learned by reading other reviews. So before I started I grabbed my trusty vise grip pliers and a small screw driver. I locked onto the switch actuator, the part that the refrigerator door pushes in, with the vise grips and pulled on it just hard enough to get the screw driver inserted in the right side to push in the catch clip so the swi... read more

Relay

  • Customer: John H from Austin TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 23 of 31 people found this instruction helpful
Removed back panel. Opened cover to relay attached to the compressor and pulled off replacing with new relay. No problem.

Better than paying $250 for someone else to do it. read more