Models > ERT2018DBRBB

ERT2018DBRBB General Electric Refrigerator - Overview

Get Parts and Repair Help for ERT2018DBRBB

If you know the refrigerator repair part you need, you can browse the list of all parts on the ERT2018DBRBB, or you can search by name or part description. You can also find your part by where it is located on the ERT2018DBRBB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for ERT2018DBRBB parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.58

Light Bulb - 40W

Sold individually.

Order within the next 4 hrs and your part ships today!
$3.00

Evaporator/Condensor Fan Grommet

Order within the next 4 hrs and your part ships today!
$3.28

SWITCH LIGHT

Order within the next 4 hrs and your part ships today!
$31.82

Condenser Fan Motor

This fan motor circulates the air through the refrigerator grille and cools the compressor and condenser coils. It also helps to evaporate extra water in the drain pan.

Order within the next 4 hrs and your part ships today!
$29.25

Vegetable Drawer Slide Rail - Right Side

Order within the next 4 hrs and your part ships today!
$12.17

Package of 12 Screws

Order within the next 4 hrs and your part ships today!
$5.34

Light Socket

Order within the next 4 hrs and your part ships today!
$1.88

SCR 8-18 CA HX 1/2 S

Order within the next 4 hrs and your part ships today!
$29.25

Vegetable Drawer Slide Rail - Left Side

Order within the next 4 hrs and your part ships today!
$2.57

SCR 10-16 AB PNT20 1/2 S

Sold Individually.

Order within the next 4 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Sticking Light Switch

  • Customer: Jonathan from Lilburn GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 47 of 52 people found this instruction helpful
I applied some tips learned by reading other reviews. So before I started I grabbed my trusty vise grip pliers and a small screw driver. I locked onto the switch actuator, the part that the refrigerator door pushes in, with the vise grips and pulled on it just hard enough to get the screw driver inserted in the right side to push in the catch clip so the swi... read more

Noisey fan/motor (bad motor bearing ?)

  • Customer: Keith from Fort Worth TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 19 of 22 people found this instruction helpful
Removed 2 phillips head screws to remove ice maker (could have just loosened them)
Pulled fan off of shaft
Removed 2 phillips head screws on motor bracket , disconnected three motor wires & removed motor.
reversed process to install new motor & fan blade.
Space was a little tight for two hand and arms, but do-able. read more

fridge was warm

  • Customer: ELLIS from LEANDER TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 32 of 61 people found this instruction helpful
first remove the one screw holding the cover over the defrost timer, grasp the timer and unplug from the male plug end. insert the new timer. replace the cover and the one screw. plug in the fridge enjoy.
my old fridge was 30 years old and i had to replace the timer many times. read more