Models > ERT2018DBRAA

ERT2018DBRAA General Electric Refrigerator - Overview

Get Parts and Repair Help for ERT2018DBRAA

If you know the refrigerator repair part you need, you can browse the list of all parts on the ERT2018DBRAA, or you can search by name or part description. You can also find your part by where it is located on the ERT2018DBRAA by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for ERT2018DBRAA parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.


Light Bulb - 40W

Sold individually.




Evaporator/Condensor Fan Grommet


Package of 12 Screws


Vegetable Drawer Slide Rail - Right Side


Light Socket


Fresh Food Door Gasket

This fresh food door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.


Door Shelf Retainer Bar End Cap - Left or Right Side

This end cap can be used for the right or left side of the refrigerator door shelf or the freezer door shelf.


Condenser Fan Motor

This fan motor circulates the air through the refrigerator grille and cools the compressor and condenser coils. It also helps to evaporate extra water in the drain pan.


Vegetable Drawer Slide Rail - Left Side

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Sticking Light Switch

  • Customer: Jonathan from Lilburn GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 40 of 45 people found this instruction helpful
I applied some tips learned by reading other reviews. So before I started I grabbed my trusty vise grip pliers and a small screw driver. I locked onto the switch actuator, the part that the refrigerator door pushes in, with the vise grips and pulled on it just hard enough to get the screw driver inserted in the right side to push in the catch clip so the swi... read more

fridge was warm

  • Customer: ELLIS from LEANDER TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 29 of 54 people found this instruction helpful
first remove the one screw holding the cover over the defrost timer, grasp the timer and unplug from the male plug end. insert the new timer. replace the cover and the one screw. plug in the fridge enjoy.
my old fridge was 30 years old and i had to replace the timer many times. read more

it appears some one damaged the gasket in the front

  • Customer: Kah Po from San Francisco CA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 15 of 18 people found this instruction helpful
First, I removed the old gasket by ripping it out of front,

Second, I cleansed the rust (no idea how that get there, maybe it's a cheap fridge)

Third, I took some boiling water from the water boiler and dip the new gasket in it to "smooth" out the gasket and make it more "pliable" (really, it didn't seem like much happened, nonetheless... read more