Quick Question!

Have you ever purchased from PartSelect.com before?

Models > ERT2018DARBB

ERT2018DARBB General Electric Refrigerator - Overview

Get Parts and Repair Help for ERT2018DARBB

If you know the refrigerator repair part you need, you can browse the list of all parts on the ERT2018DARBB, or you can search by name or part description. You can also find your part by where it is located on the ERT2018DARBB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for ERT2018DARBB parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.91

Light Bulb - 40W

Sold individually.

$6.29

SWITCH LIGHT

$6.59

Evaporator/Condensor Fan Grommet

$29.61

Vegetable Drawer Slide Rail - Right Side

$8.27

Light Socket

$5.35

SCR 10-16 AB PNT20 1/2 S

Sold Individually.

$12.68

Package of 12 Screws

$19.35

Door Shelf Retainer Bar End Cap - Left or Right Side

This end cap can be used for the right or left side of the refrigerator door shelf or the freezer door shelf.

$14.37

Shelf Support End Cap - Right Side

$10.65

Door Shelf End Cap - Left Side

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Sticking Light Switch

  • Customer: Jonathan from Lilburn, GA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 71 of 83 people found this instruction helpful
I applied some tips learned by reading other reviews. So before I started I grabbed my trusty vise grip pliers and a small screw driver. I locked onto the switch actuator, the part that the refrigerator door pushes in, with the vise grips and pulled on it just hard enough to get the screw driver inserted in the right side to push in the catch clip so the swi... read more

Noisey fan/motor (bad motor bearing ?)

  • Customer: Keith from Fort Worth, TX
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 26 of 31 people found this instruction helpful
Removed 2 phillips head screws to remove ice maker (could have just loosened them)
Pulled fan off of shaft
Removed 2 phillips head screws on motor bracket , disconnected three motor wires & removed motor.
reversed process to install new motor & fan blade.
Space was a little tight for two hand and arms, but do-able. read more

bad light socket

  • Customer: nancy from silsbee, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 25 of 30 people found this instruction helpful
unplugged refrigerator. removed light bulb from old socket. unsnapped old light socket and pulled it out just enough to diconnect the electrical plug that plugs into the socket . discarded the old socket and plugged in new socket. snapped in new socket into refrigerator. i watched how to do this simple procedure on you tube and decided to do it myself. easy ... read more