Quick Question!

Have you ever purchased from PartSelect.com before?

Models > ERSD48NG

ERSD48NG Dacor Range - Overview

Parts and Repair Help for models starting with ERSD48NG

If you know the range repair part you need, you can browse the list of all parts for models starting with ERSD48NG, or you can search by name or part description. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Models starting with ERSD48NG

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Halogen Light Bulb - 10W 12Vac


Rubber Feet - Kit of 4

The rubber feet, also known as the burner grate foot, is used on the bottom of gas burner grates for a range and cooktop. The rubber feet help the grates sit on the top of a burner cap properly and works to keep it leveled. This way you can place your pans and pots on an even surface. This part also prevents your kitchen pots from scratching and damaging the top of your stove. This can lead to friction and the paint on the stove top can chip. The dimensions on this part are 2 inches x 2 inches x 2 inches. Make sure to unplug range from power source before installing this part.





This single igniter assembly kit is also known as a spark igniter, igniter service kit, spark electrode, or burner igniter. The kit is a genuine OEM replacement kit that is sourced directly from the manufacturer. It includes one igniter, one spring, one C-clip, and heat shrink tubing. These parts are what produces the spark that lights the surface burner on your oven, range, or stove. Please note that this kit is for one burner only. It is recommended to check your other burner igniters in case they should be replaced as well. Check your original burner ring for holes, this kit will not be compatible with burner rings that have holes, and you may need a new one.





This is a burner head O-ring and is used in conjunction with your range cooktop. The purpose of the O-ring is to sit between the range cooktop and the burner head assembly. This part will create a seal,which will limit the risk of fuel leaks over time. Due to natural wear and tear this part may dry out or crack. If this happens, you will need to replace this part. We also recommend that when you replace a burner head you should also replace the O-ring. This model is just over 3 inches in diameter.









Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

All cooktop eyes started sparking at the same time, had to turn off at circuit breaker

  • Customer: Janice from Hoover, AL
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Called local repair company and said that it wasn't fixable, had to go. It was 12 years old and they don't make them to last anymore. Next door neighbor is handy. He came over and got the part out and said to go downtown and get replacement part. It was late and I looked on the internet and saw your Hours of Op, called and got a Saint named Lee. He and I wen... read more