Quick Question!

Have you ever purchased from PartSelect.com before?

Models > ERSD30LP Dacor > Parts

ERSD30LP Dacor Range - Parts

All parts for the Dacor Range ERSD30LP

Below is a list of all parts for the Dacor Range ERSD30LP. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the ERSD30LP
1-14 of 158
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$6.27

BRASS NUT, C&B HEAD

$13.18

Rubber Feet - Kit of 4

The rubber feet, also known as the burner grate foot, is used on the bottom of gas burner grates for a range and cooktop. The rubber feet help the grates sit on the top of a burner cap properly and works to keep it leveled. This way you can place your pans and pots on an even surface. This part also prevents your kitchen pots from scratching and damaging the top of your stove. This can lead to friction and the paint on the stove top can chip. The dimensions on this part are 2 inches x 2 inches x 2 inches. Make sure to unplug range from power source before installing this part.

$17.17

O-RING,D BURNER

This is a burner head O-ring and is used in conjunction with your range cooktop. The purpose of the O-ring is to sit between the range cooktop and the burner head assembly. This pa...

$37.47

DOOR GASKET

$73.43

HINGE KIT, (QTY2)

$37.59

TRIM RING, KNOB,

$32.05

LEG, NEW 1/2" EPICURE

$13.21

KNOB, EPICURE

$52.91

FILTER-CONVECTION OVEN

$41.40

BURNER RING, "D" BURNER - 2PK

$203.48

ASY, WINDOW PACK

This window pack is also known as an oven door window pack assembly and is a part for your range. The window pack forms a see-through heat barrier within the oven door glass. Befor...

$119.60

BAKE ELEMNT KIT,W305-240

This bake element kit has two slip on connecters at the rear end and is located at the bottom of the oven.*Please note: this part has been updated by the manufacturer and no longer has a terminal block. If your oven does not heat enough or overheats, then the element may be defective or burned out. Replacing this part could be a solution to your symptoms. The tools needed for this installation project are a splicing tool and a multi screwdriver. Remember to unplug the power source to the oven as a safety precaution. Refer to the installation instructions provided by the manufacturer for further guidance.

$73.17

OVEN RACKS, 30"

$31.21

IGNITER ASSY KIT, SINGLE

This single igniter assembly kit is also known as a spark igniter, igniter service kit, spark electrode, or burner igniter. The kit is a genuine OEM replacement kit that is sourced directly from the manufacturer. It includes one igniter, one spring, one C-clip, and heat shrink tubing. These parts are what produces the spark that lights the surface burner on your oven, range, or stove. Please note that this kit is for one burner only. It is recommended to check your other burner igniters in case they should be replaced as well. Check your original burner ring for holes, this kit will not be compatible with burner rings that have holes, and you may need a new one.

All Parts for the ERSD30LP
1-14 of 158