Models > EPE861KB829A

EPE861KB829A Hardwick Oven - Overview

Get Parts and Repair Help for EPE861KB829A

If you know the oven repair part you need, you can browse the list of all parts on the EPE861KB829A, or you can search by name or part description. You can also find your part by where it is located on the EPE861KB829A by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your oven. We’ve also included any installation videos we have for EPE861KB829A parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.52

Light Bulb - 40W

Sold individually.

$17.20

Terminal Block

It provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).

$5.10

Oven Door Spring

Sold individually.

$34.32

Bake Element

This spade style bake element has push on wire terminals. It is found on the bottom of the oven.

$30.05

Burner Control Switch - 250V

This switch controls both the 6" and 8" surface burners. Shaft is 1" long and had a D-shape.

$3.82

SCREW

$2.70

Screw

This screw is sold individually.

$3.82

Thermostat Clip

This clip is used to secure the thermostat bulb. They are sold individually.

$30.49

Vertical Side Door Seal

$17.55

Light Blub - Fluorescent - 18 Watt

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Inner Oven Glass broken

  • Customer: David from Wayne NJ
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 19 of 24 people found this instruction helpful
I removed two retainer screws which released the outside panel.
Next I removed 2 screws which hold the middle glass pane from one of its retainer brackets.
The was another panel with 4 screws to remove before reaching the final glass inner assembly.
Once that panel was reoved with the broken glass it was time to put the repacement glass assemb... read more

Burned terminal block and filter board

  • Customer: Joseph from Decatur GA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set, Wrench set
  • 31 of 69 people found this instruction helpful
Removed and replaced above named parts, rewired.Be sure to tighten all nuts that secure wires. I believe this is what caused the problem. read more

oven door spring broke and had to be replaced, oven light out and had to be replaced

  • Customer: Ed from Anderson IN
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 12 of 13 people found this instruction helpful
The old gasket fell apart as I replaced the oven light and had to be replaced. That was very easy once I received the part. The spring broke on the oven door and had to be replaced. I initially tried to reach in from inside the pan drawer under the oven. That was impossible to reaach but it only took a few minutes to realize that I had to remove the side... read more