Quick Question!

Have you ever purchased from PartSelect.com before?

Models > EMO3000HCC03

EMO3000HCC03 General Electric Microwave - Overview

Get Parts and Repair Help for EMO3000HCC03

If you know the microwave repair part you need, you can browse the list of all parts on the EMO3000HCC03, or you can search by name or part description. You can also find your part by where it is located on the EMO3000HCC03 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the EMO3000HCC03

[Viewing 1 of 1]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$7.05

Light Bulb - 40W 130V

This light bulb is a 40 watt, 130-volt clear appliance light bulb that is manufactured to fit microwaves with small-base light bulb sockets. The light bulb illuminates the inside o...

$13.14

Light Socket - 250V 75W

This is a light bulb socket that is manufactured to fit a microwave appliance. The socket is meant to fit small-base light bulbs. The light bulb is not included with this part, so consider ordering the light bulb if necessary. You may need to replace this part if the existing socket is broken, cracked, or if light bulb is not turning on, and a new light bulb does not work. This is an electrical part so please be sure to disconnect power to your appliance before repair.

$21.50

Secondary Door Switch

The secondary door switch is a simple on/off mechanism that stops the microwave from operating when the door is open. The switch monitors the door latch position, and communicates ...

$6.61

Turntable Coupler

$19.75

Monitor Door Switch

Unplug your microwave before attempting this repair. You will need to remove the grill, which is held into place by two screws at the top of the grill (open your microwave door bef...

$51.07

Drive Motor

This is a microwave turntable drive motor. This is a genuine OEM replacement part. It accepts a D-shaped drive shaft. The drive motor is located under the glass microwave turntable, and allows the turntable plate to rotate while the appliance is in use. Your drive motor might be broken if it is noisy or does not turn at all. Be sure to disconnect power to the microwave before starting this repair. Simply unscrew the bottom plate and the drive motor of your microwave, disconnect the wires, and install the replacement part. This drive shaft is 21 volts, is about 2 inches in diameter, and is made of metal.

$75.40

Cooking Tray

This is a cooking tray and it is a common component in any microwave. This piece is transparent and is made of glass. The diameter of this part measures to be roughly 12.5 inches. ...

$4.98

Flat Cab Mounting Bolt

$33.84

Turntable Roller Guide

This roller guide sits underneath the glass turntable tray.

$57.73

Aluminum Grease Filter

This aluminum filter collects grease particles in the air from cooking. Sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

A Cooking Tray developing a growing crack

  • Customer: Ruth from New Bern, NC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 467 of 469 people found this instruction helpful
The unbelievable happened. Our glass carousel cooking tray developed a crack. Each day the crack got longer. I ordered a new one on Tuesday and it arrived the next morning just before the cracked one completely cracked. I have never experienced such fast service. I highly recommend PartSelect and their helpful service. read more

plate broke

  • Customer: craig from lindenhurst, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 459 of 541 people found this instruction helpful
replaced the plate read more

light worked, timer and control pad worked, but no turntable, no heat, no noises of any sort, just didn't start up

  • Customer: Marla from Arlington, TX
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 219 of 250 people found this instruction helpful
Noted on partselect.com that someone else with this problem, found it to be secondary door switch. There are three door switches in this model, but online info noted that one of the three might feel "soft" (in my case, one switch clicked in a rather "jiggly" way, the other two were strong decisive clicks.) To access the door switches on this model was the ... read more