Models > EKS396

EKS396 Caloric Range - Overview

Get Parts and Repair Help for EKS396

If you know the range repair part you need, you can browse the list of all parts on the EKS396, or you can search by name or part description. You can also find your part by where it is located on the EKS396 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for EKS396 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$5.05

Chrome Drip Bowl - 8"

This part has been substituted by the manufacturer and has a hole in the center. It no longer has a solid bottom. Sold individually.

$2.52

Light Bulb - 40W

Sold individually.

$27.77

Hinge Kit - Right Side

$17.55

Light Blub - Fluorescent - 18 Watt

$50.09

Broil Element - 240V

$39.34

Bake Element - 240V 2500W

$136.60

MAGNETRON

This part is used to generate microwave energy/heat.

SWITCH- CL

NUT, SCREW

Oven Fan Motor

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The bake element burned in half, shorted out, made the lights in the house flick and burst in to a short lived flame.er

  • Customer: Michael from Winchendon MA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 5 of 5 people found this instruction helpful
Exactly:
(e.g. First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires...) read more

Replacing the bulb in the freezer side

  • Customer: Yafa (and David) from Bothell WA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 4 of 5 people found this instruction helpful
Removed the ice brucket,
Removed the light shield by releasing one screw using a nutdriver.
Replacing the bulb and reinstalled the light shield.

Your web site is one of the best and most helpfull service sites I ever used. Just wish that in the future you will ship parts overseas. read more

not proper heat in oven

  • Customer: Mary from Raytown MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 4 of 5 people found this instruction helpful
ordered part -got it the next day- stalled as long as I could then opened oven removed racks-used screwdriver to loosen screws in bracket holding element on- pulled out element-used pliers to take off wires in element-thew old element as far as possible-reversed procedure to put in new element-replaced rack-received praises of all afffected-the end read more