Models > EKD395

EKD395 Amana Oven / Microwave Combo - Overview

Get Parts and Repair Help for EKD395

If you know the oven / microwave combo repair part you need, you can browse the list of all parts on the EKD395, or you can search by name or part description. You can also find your part by where it is located on the EKD395 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your oven / microwave combo. We’ve also included any installation videos we have for EKD395 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.58

Light Bulb - 40W

Sold individually.

Order within the next 10 hrs and your part ships today!
$4.09

Chrome Drip Bowl - 8"

This part has been substituted by the manufacturer and has a hole in the center. It no longer has a solid bottom. Sold individually.

Order within the next 10 hrs and your part ships today!
$37.95

Broil Element

This broil element is found on the roof of the oven.

Order within the next 10 hrs and your part ships today!
$30.34

Light Blub - Fluorescent - 18 Watt

This light bulb is used in a range's control panel.

Order within the next 10 hrs and your part ships today!
$40.14

Bake Element - 240V 2500W

This bake element is found on the bottom of the oven.

Order within the next 10 hrs and your part ships today!

SWITCH- CL

NUT, SCREW

WINDOW ASSY

SWITCH, ROCKER

STARTER, FLOURESCENT

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Light Bulb burned out

  • Customer: Jeffrey from Marietta GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 5 of 5 people found this instruction helpful
Removed the two screws that hold the back glass in place. Rotated old bulb out of it's lamp fixture and replaced it with the new bulb. Replaced glass and reinstalled the screws.
The hardest part was finding the bulb ... a very unique 18W flourescent. I wasted a couple of hours trying to locate it locally at my regular suppliers. The order at PatsSelec... read more

The bake element burned in half, shorted out, made the lights in the house flick and burst in to a short lived flame.er

  • Customer: Michael from Winchendon MA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 5 of 5 people found this instruction helpful
Exactly:
(e.g. First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires...) read more

Broiler burned out

  • Customer: David from Lewisburg TN
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers, Socket set
  • 4 of 4 people found this instruction helpful
The Job didn’t take very long at all. I pulled the unit out and unplug it before I started the repair. I had to remove the back two access cover plates to get to the two wire leads that connect the broiler. I don’t believe there was enough wire to be able to do it all from the front side. Next I disconnected the two wires that connected it while remembering ... read more