Quick Question!

Have you ever purchased from PartSelect.com before?

Models > EJS335

EJS335 Caloric Range - Overview

Get Parts and Repair Help for EJS335

If you know the range repair part you need, you can browse the list of all parts on the EJS335, or you can search by name or part description. You can also find your part by where it is located on the EJS335 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for EJS335 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$4.17

Chrome Drip Bowl - 8"

This drip bowl is also known as a drip pan, and it is designed for use with cooktops and ranges. It sits below 8-inch burner elements, and catches drips and spills from the cookwar...

Order within the next 3 hrs and your part ships today!
$11.12

Surface Burner Plug-In Block Kit

The surface burner plug-in block kit features a newer-style terminal block. This kit is designed for use with ranges and cooktops. This terminal block is how the coil element on your stove connects to the inner wiring of your appliance. Without this connection your burner element would not get the electrical current it needs to heat up. When your element will not heat at all, or if it is not heating properly it is likely an issue with the terminal block. You need to remove the element to replace this part. While you have the element out, inspect the element and the terminal for any corrosion, arcing, or discoloration. If you notice any damage to the element or the terminals we recommend you replace this part as well. This kit includes two metal brackets, two pre-crimped high-temperature wire leads, two ceramic wire nuts, two heat-shrinking insulators, and a mounting screw. Before you begin this repair, make sure you have unplugged your appliance.

Order within the next 3 hrs and your part ships today!
$47.43

Bake Element

The bake element provides heat to the oven. If you notice that your oven is not heating enough, or not heating evenly, you may need to replace the bake element. This bake element i...

Order within the next 3 hrs and your part ships today!
$29.57

Side Oven Door Seal

This single oven door side seal is fourteen inches long. It is made of black rubber and it has a metal hook in each end.

Order within the next 3 hrs and your part ships today!
$51.56

Broil Element (16" long x 8.5" wide)

This broil element, also known as an electric oven broil element, is used in ovens. Located on the roof of your oven, the element provides and supplies the heat needed for the broi...

Order within the next 3 hrs and your part ships today!
$32.02

Oven Seal - Top or Bottom

This piece of oven door seal has a metal hook on each end. This seal is compatible with the top and the bottom of the oven door window.

Order within the next 3 hrs and your part ships today!
$117.87

Electric Oven Thermostat

The temperature of this thermostat ranges from 150 degrees Fahrenheit to 550 degrees Fahrenheit. When your oven is baking, this thermostat is allowing for 17 amps of energy and whe...

Order within the next 3 hrs and your part ships today!

OVEN RACK

SPRING, OVEN DOOR, L.

GLASS, BACKGUARD

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven seals got dried and cracked

  • Customer: Brent from Goleta, CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 21 of 29 people found this instruction helpful
The top seal was too long (my fault, ordered wrong length seal) so I had to cut it and high-temp epoxy the metal hook into the end. Overall pretty easy fix. read more

One burner didn't work all the time the other would go red hot

  • Customer: Phillip from Pekin, IL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 9 of 9 people found this instruction helpful
I unplugged the stove from the outlet, then removed the two burners I was going to be working on and the drip pans. Then I raised the top part of the stove and removed the screws holding the plug-in blocks to the stove. Then I cut the two wires going to the old plug-in block and stripped the wires back to match the new wire parts. Then I placed the sleeves o... read more

Electric burner on stove would not work

  • Customer: Ronald from Fresno, CA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 5 of 5 people found this instruction helpful
The first thing I did was to turn the power off to the stove by turning the Stove circuit breaker off at the Main breaker panel. I next removed the 4 burners by pulling them out of their plug-in blocks. I then removed the four screws that held the top of the stove to the body so I could access the bad plug-in block, the screws were located under each of th... read more