Models > EJS306

EJS306 Caloric Range - Overview

Get Parts and Repair Help for EJS306

If you know the range repair part you need, you can browse the list of all parts on the EJS306, or you can search by name or part description. You can also find your part by where it is located on the EJS306 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for EJS306 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.52

Light Bulb - 40W

Sold individually.

$4.26

Chrome Drip Bowl - 8"

This part has been substituted by the manufacturer and has a hole in the center. It no longer has a solid bottom. Sold individually.

$8.22

Surface Burner Plug-In Block Kit

This newer-style terminal block kit includes two metal brackets, two pre-crimped wires with terminals, two ceramic wire nuts, a heat shrinking tube, and a mounting screw.

$18.07

2 Piece Broiler Pan

$30.39

Surface Element - 8"

This electric range economy Y-frame surface element measures eight inches and has four turns. It carries 2100 watts and is used on some electric ranges. The center medallion is chr...

$37.32

Bake Element

The terminals are twenty-one inches apart and have a depth of two inches.

$43.52

BROIL ELEMENT

This electric oven broil element is 8-1/2 inches wide and 16 inches long. The terminal depth is 1-3/8 inches. Use this broil element for your Amana brand electric range or oven.

$3.71

PAD- BUMPE

Multi Rib Belt

OVEN RACK

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The dryer would sqeak when starting, after running it would quiet down. I thought as long as I had another repair to do, I would replace the belt with a new one.

  • Customer: Gary from Wellsboro PA
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 13 of 16 people found this instruction helpful
I removed two nut head screws on the base front panel. Pull the panel downward and the panel came off. Then I removed the two nut head screws off the bottom of the door frame.Pulled out the front frame and pulled slightly downward. I removed the wire connections that were on the door light switch. Then removed the door, and set it aside. With the door remove... read more

One burner didn't work all the time the other would go red hot

  • Customer: Phillip from Pekin IL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 8 of 8 people found this instruction helpful
I unplugged the stove from the outlet, then removed the two burners I was going to be working on and the drip pans. Then I raised the top part of the stove and removed the screws holding the plug-in blocks to the stove. Then I cut the two wires going to the old plug-in block and stripped the wires back to match the new wire parts. Then I placed the sleeves o... read more

Electric burner on stove would not work

  • Customer: Ronald from Fresno CA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 5 of 5 people found this instruction helpful
The first thing I did was to turn the power off to the stove by turning the Stove circuit breaker off at the Main breaker panel. I next removed the 4 burners by pulling them out of their plug-in blocks. I then removed the four screws that held the top of the stove to the body so I could access the bad plug-in block, the screws were located under each of th... read more