Models > EJD346

EJD346 Caloric Range - Overview

Get Parts and Repair Help for EJD346

If you know the range repair part you need, you can browse the list of all parts on the EJD346, or you can search by name or part description. You can also find your part by where it is located on the EJD346 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$3.96

Drip Bowl - 6"

$23.70

Oven Rack

$27.77

Hinge Kit - Right Side

$66.25

Burner Control Switch Kit - 8"

DISCONTINUED

CLOCK, ANALOG (BLK)

HINGE, TOP

$3.83

CABLE- CLI

HINGE, BOTTOM

SEAL, OVEN DOOR

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Old hinge snapped a rivet. It could no longer hold the weight of the door.

  • Customer: Frank from Farmingdale NY
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 2 of 2 people found this instruction helpful
I removed the two screws and pryed out the old hinge. I then put in the new hinge. The new one fit well. I went to screw it in with the supplied screws. The screws not only did not fit the hole tapped in the hinge (too big, different tread) but both screws were different from each other. They were different sizes and different types all together. I tried re-... read more

broken prong that knob fit onto

  • Customer: Lisa from Oklahoma City OK
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Wrench set
  • 3 of 5 people found this instruction helpful
This was a piece of cake! We put off doing this for ourselves because we thought it would be difficult. We sold the house and "had" to do it. Turns out we should have done it for ourselves a long time ago. read more

Rivet broke on the right side oven door hinge

  • Customer: Roger from Pleasanton CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 2 of 3 people found this instruction helpful
Regarding my right side oven door hinge replacement, P/N PS2172201

After reading that other people had trouble threading the screws into the new hinge, I looked at the drilled mounting holes in the new hinge. Neither hole was threaded. The smaller hole used a self tapping sheet metal screw which works fine. The larger hole gets a machine screw and... read more