Models > EJA395

EJA395 Caloric Range - Overview

Get Parts and Repair Help for EJA395

If you know the range repair part you need, you can browse the list of all parts on the EJA395, or you can search by name or part description. You can also find your part by where it is located on the EJA395 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for EJA395 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$5.05

Chrome Drip Bowl - 8"

This part has been substituted by the manufacturer and has a hole in the center. It no longer has a solid bottom. Sold individually.

$2.52

Light Bulb - 40W

Sold individually.

$107.16

Electric Oven Thermostat

This part establishes and maintains the internal temperature of the oven cavity. The temperature of this thermostat ranges from 150 degrees Fahrenheit to 550 degrees Fahrenheit.

$37.32

Bake Element

The terminals are twenty-one inches apart and have a depth of two inches.

$44.25

BROIL ELEMENT

This electric oven broil element is 8-1/2 inches wide and 16 inches long. The terminal depth is 1-3/8 inches. Use this broil element for your Amana brand electric range or oven.

OVEN RACK

OVEN DOOR HANDLE, 18""

DISCONTINUED

OVEN DOOR SEAL

FRAME, UPPER OVEN DOOR

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Replacing the bulb in the freezer side

  • Customer: Yafa (and David) from Bothell WA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 4 of 5 people found this instruction helpful
Removed the ice brucket,
Removed the light shield by releasing one screw using a nutdriver.
Replacing the bulb and reinstalled the light shield.

Your web site is one of the best and most helpfull service sites I ever used. Just wish that in the future you will ship parts overseas. read more

Oven wouldn't heat

  • Customer: Jack from Rouses Point NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 4 of 6 people found this instruction helpful
I disconnected the oven power, then removed the two screws that hold the element in place, then I pulled the old element out, and connected the new element to the two wires, and reinstalled the two screws. PartSelect provides easy part selection, very quick delivery, and is my first choice for hard to find parts. I have used them in the past and am always pl... read more

oven light burnt out

  • Customer: William from Schwenksville PA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 5 people found this instruction helpful
1. Unscrewed glass cover on bulb
2. Removed old bulb
3. Screwed in new bulb
4. Replaced glass cover
5. Mixed drink & baked cupcakes read more