Quick Question!

Have you ever purchased from PartSelect.com before?

Models > EJA214

EJA214 Caloric Wall Oven - Overview

Get Parts and Repair Help for EJA214

If you know the wall oven repair part you need, you can browse the list of all parts on the EJA214, or you can search by name or part description. You can also find your part by where it is located on the EJA214 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your wall oven. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the EJA214

[Viewing 2 of 2]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$51.56

Broil Element (16" long x 8.5" wide)

This broil element, also known as an electric oven broil element, is used in ovens. Located on the roof of your oven, the element provides and supplies the heat needed for the broi...

$47.43

Bake Element

The bake element provides heat to the oven. If you notice that your oven is not heating enough, or not heating evenly, you may need to replace the bake element. This bake element is 17 inches long. The terminals are 21 inches apart, and have a depth of just 2 inches. The bake element connects to the back of your oven, so you may need to remove the oven racks prior to completing this repair. Be sure to disconnect the power source to the oven before you begin this repair. You will need a Phillips screwdriver to complete this repair.

OVEN RACK

OVEN DOOR HANDLE, 18""

DISCONTINUED

PANEL, STORAGE DRAWER

PANEL, STORAGE DRAWER

PANEL, STORAGE DRAWER

PANEL, STORAGE DRAWER

SUB 310537, STORAGE D

Common Symptoms of the EJA214

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven wouldn't heat

  • Customer: Jack from Rouses Point, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 4 of 6 people found this instruction helpful
I disconnected the oven power, then removed the two screws that hold the element in place, then I pulled the old element out, and connected the new element to the two wires, and reinstalled the two screws. PartSelect provides easy part selection, very quick delivery, and is my first choice for hard to find parts. I have used them in the past and am always pl... read more

Bake element broke in two THANKSGIVING Morining

  • Customer: Susan from Rowley, MA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 3 people found this instruction helpful
My husband simply unscrewed the screws on each side and put on the new bake element. Just need to remember to UNPLUG the stove as he had a few sparks at first . . . other than that, it was simple. Thanks!!! read more