Quick Question!

Have you ever purchased from PartSelect.com before?

Models > EIMED60JMB0

EIMED60JMB0 Electrolux Dryer - Overview

Get Parts and Repair Help for EIMED60JMB0

If you know the dryer repair part you need, you can browse the list of all parts on the EIMED60JMB0, or you can search by name or part description. You can also find your part by where it is located on the EIMED60JMB0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dryer. We’ve also included any installation videos we have for EIMED60JMB0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

High Limit Thermostat

This high limit thermostat has a limit of 260 degrees Fahrenheit. Meaning that it will cut out when the internal dryer temperature reaches 260. This thermostat cuts back in when th...


Heater - 3 Element - 5500W


Lint Filter


Adjustable Leveling Foot - Black

Sold Individually.





Sold individually.


High Temperature Adhesive

Used for installing felt and rubber seals on dryers.






SCREW - M5 X 0.8 X

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Ice Maker Repair

  • Customer: Kristi from Winfield, WV
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Pliers
  • 11 of 15 people found this instruction helpful
The ice maker wouldn't fill with water. The maker itself appeared to operate but the tray would not fill. I ordered the part from PartSelect.com. The website allowed me to conveniently match a picture of the part with my part on the refrig. I ordered the part and it arrived in two days. I was impressed!

I turned the water to the ice maker off... read more

needed a new filter

  • Customer: margaret from virginia beach, VA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
i simply took the old one out and replaced it with the new one. it fit perfectly. read more

Dryer Would Not Heat

  • Customer: John from Hummelstown, PA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
I researched possible causes on line and watched a PartsSelect video on YouTube on how to test. I ended up misreading test results and ordered the High Limit Thermostat but subsequently realized problem was the Terminal Block. No problem, PartsSelect took back the Thermostat (I hadn't installed it) and shipped me the Terminal Block. My dryer was back up a... read more