Models > EIFLS55IIW0

EIFLS55IIW0 Electrolux Washer - Overview

Get Parts and Repair Help for EIFLS55IIW0

If you know the washer repair part you need, you can browse the list of all parts on the EIFLS55IIW0, or you can search by name or part description. You can also find your part by where it is located on the EIFLS55IIW0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your washer. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?



Dispenser Drawer Assembly


Door Strike



Also known as Door Boot Seal.



Sold individually.


Single Shock Mounting Pin




SCRW, 10-16 X .75

Sold individually.





Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Detergent dispenser drawer would not stay closed

  • Customer: Karen from Birchwood WI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 23 of 29 people found this instruction helpful
Removed old drawer and replaced it with new one. This is the second drawer assembly I have purchased in 6 months. This piece of junk must be a cash cow for Electrolux. If they would make the small latch out of metal instead of plastic, there would be no problem. But that might cost an additional $ .007 per washer. On the positive side, had the... read more

The boot got a hole in it and needed to be cleaned out.

  • Customer: Bernard from Baltimore MD
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
  • 0 of 0 people found this instruction helpful
First I watched a youtube video on how to do it. Then I took to machine apart and was able to replace the boot in a short period of time. You have to be careful when putting it on so the guides in the rubber line up with the pipes. It is a good idea to check the filter every few years because it does collect lint and strings that will clog the drain and caus... read more

not cycling

  • Customer: donna from gardnerville NV
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
put new part did reset on main controles read more