Models > EIDW6405HT0A > Instructions

EIDW6405HT0A Electrolux Dishwasher - Instructions

All installation instructions for EIDW6405HT0A parts

These instructions have been submitted by other PartSelect customers and can help guide you through the dishwasher repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the EIDW6405HT0A
1-5 of 5
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The brackets on the lower rack had worn out and not holding up the tines.

  • Customer: Alan from Gladstone OR
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 2 people found this instruction helpful
The parts came in a timely manner and took about 15 minuets to replace with no tools.

No water flow

  • Customer: Craig from Yuma AL
  • Difficulty: Very Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Nutdriver, Pliers, Screw drivers, Socket set, Wrench set, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
Changed out Motor and Pump also canged out control box but no joy

New model did not come with knive tray

  • Customer: Robert from Fort Myers FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Ordered the Versa Tray that was a component of the old dishwasher but not of the new replacement machine. The fun part was the ease of finding the part with Part Select, and the fact that it was fifty per cent the cost of the manufacturer's part on the official web site. Installation is simply to place the over rack hooks on the side of the tray in place and using it! Love the service and handling of the back order situation. Great communication and dspeedy delivery. Thanks guys!

Broken bracket

  • Customer: Tracie from Tyler TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Easily removed the broken bracket and snapped the new one in its place. Took less than 30 seconds!

The center spray arm with manifold was warped and did not spin when the dishwasher was running.

  • Customer: Melissa from Black Hawk CO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
We snapped the broken spray arm off, and snapped the new arm on. We had to use the screw driver as leverage to snap on new spray arm.
All Instructions for the EIDW6405HT0A
1-5 of 5