Quick Question!

Have you ever purchased from PartSelect.com before?

Models > EIDW6105GS1A > Parts

EIDW6105GS1A Electrolux Dishwasher - Parts

All parts for the Electrolux Dishwasher EIDW6105GS1A

Below is a list of all parts for the Electrolux Dishwasher EIDW6105GS1A. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the EIDW6105GS1A
1-14 of 177
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?


The roller assembly is attached to the upper dishrack of your dishwasher. This is what allows you to easily move your dishrack in and out. The wheel may become damaged over time an...



This is an OEM dishrack roller assembly that fits on the lower rear of your dishwasher rack. This part is sold individually. Check the opposite lower dishrack assembly before ordering in case it needs to be replaced as well. The rollers attach to your lower dishrack and allow the rack to smoothly roll forward and backward when the dishwasher door is open. Without the rollers, it would be difficult to access the rack to safely fill and empty the appliance with dishes. The front lower roller assembly will have a different part number than this part.



This gasket is a seal for your dishwasher and prevents leaking from occurring. The gasket can become worn down over time and you might notice some discoloration. This indicates a r...






Center Spray Arm with Manifold

Spray arms rotate and spray water to clean the dishes inside the dishwasher tub. This part is located beneath the upper rack. The spray arm is meant to spray water and detergent forcefully over the dishes. If your dishes are not being cleaned properly, you should check if there is an issue with the spray arm. If the spray arm is made of plastic, it can become warped or cracked. If it is a metal spray arm, it can pull open at the seams or get bent. Make sure the spray arms can move evenly and freely on their bearing rings and mounting brackets. Remove your spray arms and check to ensure they are straight and undamaged. This part includes the manifold. NOTE: Clogged holes are a hint to check if there is a problem with the filter system that resulted in debris coming into the arms.





This clip is designed for use in your dishwasher. If you notice that your original clip is damaged, or the dishwasher is not cleaning dishes properly, you may need to replace it. The clip snaps on to the top dish rack. This product is gray in color and is made entirely of plastic. The clip also comes in black, however both the gray and black models function in the same way. This product is approximately 6 inches in length, by 4 inches in width. This clip is an OEM part sourced directly from the manufacturer. This part is sold individually.













All Parts for the EIDW6105GS1A
1-14 of 177