Models > EI30BM6CPSA

EI30BM6CPSA Electrolux Microwave - Overview

Sections of the EI30BM6CPSA

[Viewing 3 of 3]

Manuals & Care Guides for EI30BM6CPSA

Click to download
Keep searches simple, eg. "belt" or "pump".
FUSE – Part Number: 5304509451
FUSE
★★★★★
★★★★★
(8)
PartSelect #: PS12071294
Manufacturer #: 5304509451
This fuse, also known as a cartridge fuse, is a genuine OEM replacement part for microwaves. It has a glass cylindrical body with a metal cap on each end. The cap connects the fuse to the circuit. If ...
$13.12
  In Stock
Door Latch – Part Number: 5304477389
Door Latch
★★★★★
★★★★★
(16)
PartSelect #: PS2582995
Manufacturer #: 5304477389
This door latch keeps the microwave door closed during operation. The latch is approximately 7 inches long and has 2 hooks to ensure that the door closes properly. The hooks also contact the door swit...
$43.75
  In Stock
Wave Guide Cover – Part Number: 5304509435
Wave Guide Cover
★★★★★
★★★★★
(7)
PartSelect #: PS12071278
Manufacturer #: 5304509435
This OEM waveguide cover in your microwave is a heat-resistant component that prevents food, grease, and moisture from entering the waveguide. It is typically located on the side or top wall of the co...
$14.88
  In Stock
Door Switch – Part Number: 5304509459
Door Switch
★★★★★
★★★★★
(4)
PartSelect #: PS12071302
Manufacturer #: 5304509459
This door switch is designed for use with various makes and models of microwaves and is a genuine OEM part. This individually sold switch connects to the frame of the microwave through the door switch...
$52.03
  In Stock
PLATE – Part Number: 5304509487
PLATE
★★★★★
★★★★★
(3)
PartSelect #: PS12071322
Manufacturer #: 5304509487
Hardware is not included. Must be ordered separately.
$56.10
  In Stock
PUREAIR MICROWAVE F – Part Number: OTRFILTER
PUREAIR MICROWAVE F
★★★★★
★★★★★
(1)
PartSelect #: PS12366452
Manufacturer #: OTRFILTER
This is an authentic charcoal filter, which works with microwaves.
$28.16
  In Stock
MOTOR – Part Number: 5304509440
MOTOR
★★★★★
★★★★★
(4)
PartSelect #: PS12071283
Manufacturer #: 5304509440
This motor rotates the glass turntable in the microwave and accepts a D- shaped shaft.
$80.78
  In Stock
SWITCH – Part Number: 5304509460
SWITCH
PartSelect #: PS12071303
Manufacturer #: 5304509460
$38.50
  In Stock
ADAPTER – Part Number: 5304509485
ADAPTER
PartSelect #: PS12071320
Manufacturer #: 5304509485
$26.42
  In Stock
SPRING – Part Number: 5304464069
SPRING
PartSelect #: PS1993448
Manufacturer #: 5304464069
$11.23
  Special Order
Lamp Holder – Part Number: 5304464091
Lamp Holder
★★★★★
★★★★★
(2)
PartSelect #: PS1993458
Manufacturer #: 5304464091
$49.95
  In Stock
DAMPER – Part Number: 5304509486
DAMPER
PartSelect #: PS12071321
Manufacturer #: 5304509486
This is an OEM vent damper, which works with microwaves.
$27.51
  In Stock

Questions And Answers for EI30BM6CPSA

Ask our experts a question about this model and we'll get back to you as soon as possible!

2 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
January 7, 2022
Looking for light bulbs located on the underside of the microwave can Electrolux canada supply these? The info on the bulb is kec 125v 40. Please advise. Regards
For model number EI30BM6CPSA
PartSelect logo
Hello John, Thank you for your inquiry. We have researched the model number you have provided and the part number for the light bulbs on the bottom of the microwave is PS5136236. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:
Helen
February 8, 2023
We had a power outage and when the power came back on the led light is so faded we can barely see it. The inside light still works. It's as if it's almost faded out. What do you think the issue is?
For model number EI30BM6CPSA
PartSelect logo
Hi Helen, thank you for reaching out. Most of the time replacing the defective PC board, part number PS12728971, can solve the issue of a dim display. However, a control assembly, part number PS11726493, can also be the culprit. We hope this solves your problem!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1

Common Symptoms of the EI30BM6CPSA

[Viewing 4 of 4]
Won’t turn on
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door not closing properly
Fixed by
these parts
Fixing Fixing
Show All
Tray won’t turn
Fixed by
these parts
Fixing
Show All
Doesn’t shut off
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Microwave tripped circuit breaker when turned on
Remove vent cover then remove touch screen control panel. When you remove control panel take photo of where everything is plugged in then unplug and remove control panel. 3 door switches located next to door in a plastic chassis. Test each switch with current tester. Remove the bad switch and replace with the new one. You tube DIY helped.
Parts Used:
SWITCH
  • Arthur from LUTZ, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
26 of 42 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Power would not come on, would trip breaker when connected.
First thing I dir was search YouTube for any related videos and found this one https://www.youtube.com/watch?v=uHj4H9Fdxrc, it was the exact problem my microwave was exhibiting. Once I verified the problem by troubleshooting, I removed the part and verified that the switches were working fine, the door latch assembly showed signs of wear which was the cause of the problem. After receiving the replacement part I installed it, verified that power was restored to the unit and reassembled the microwave, works fine, hope it lasts a long time!
Parts Used:
Switch Holder
  • JOSEPH from MIAMI, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
12 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Thermostat bad....but couldn't fix it
My grandfather who is well versed as an electrician checked my microwave out because it wasn't worked. He used a multimeter to check electric current to parts in the microwave. He said a specific thermostat was not getting any current going through. I ordered that replacement part from this site and when it came in it didn't have current running through it either. He said he thought the part that was given to me was faulty. I called this companies number to ask some questions but the machine said they aren't taking any inquiry calls because of the pandemic right now. So I currently don't know what the problem is with my microwave. I want to return the part but unfortunately during Christmas time the packaging got thrown away. So as of right now I'm out the part money and probably money to buy a new appliance.
Parts Used:
THERMOSTAT
  • Derek from JOPLIN, MO
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!