If you are having trouble cleaning out your grease filter, or if it is damaged to the point of no return, maybe it is time to replace it. The grease filter is a ventilator that traps grease from the e...
The relay switch may also be known as the door micro switch and is a part for your microwave. The function of this part is to monitor the door latch and communicate whether the door latch is open or c...
$45.04
In Stock
Order within the next 12 hrs and your part ships today!
The glass tray, used in a microwave, holds food plates and containers on it. The glass tray, also known as a turntable, rotates when the microwave is heating up food to ensure the plate of food is eve...
$73.81
In Stock
Order within the next 12 hrs and your part ships today!
This is a lower handle end cap for a microwave door. It covers the end of the microwave door handle. The cap measures approximately 2 inches by 2.5 inches and is stainless steel. It is located at the ...
$34.16
In Stock
Order within the next 12 hrs and your part ships today!
This part is an upper handle end cap and it works in conjunction with your microwave. The purpose of this end cap is to clip into the microwave to cover the end of the door handle. This part is made o...
$46.77
In Stock
Order within the next 12 hrs and your part ships today!
The roller guide sits underneath the glass turntable tray in your microwave. If your microwave turntable tray is not rotating properly, you may need to replace the turntable roller guide. The function...
This is an exhaust damper assembly for a microwave, which is also known as a microwave vent damper. The damper directs air flow through the vent duct from the top or rear of your microwave, depending ...
This mounting bracket is used to mount microwaves to the wall when installing the unit over a range. This metal, genuine OEM mounting bracket is approximately 31 inches long x 2 inches wide. If you no...
The microwave door latch spring creates tension, and engages the door latch when the door is closed. This spring is made completely of metal, and is approximately 1 inch long. If your microwave door w...
$48.25
In Stock
Order within the next 12 hrs and your part ships today!
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Renee
May 12, 2023
I have no light function under my microwave. We have replaced the bulbs but the lights will still not come on?? Could you tell me what part I need to make it work? Thank you for your consideration
For model number EI30BM55HSB
Hi Renee, thank you for contacting us. You may need to check the lamp holder, part number PS1993415, to fix the issue. It provides power to the light while holding the light bulb in place. We hope this sorts out your problem!
Hi Nancy, thank you for reaching out to PartSelect. There are two grease filters, part number PS466987, at the bottom of your model. Glad to be of help!
I first removed the top plate above the microwave door (3 screws), then I removed the plate containing the buttons and clock. The microwave has 3 relay switches and they are in a little holder. The holder was too difficult to remove so I just removed the bottom switch and replaced. The microwave started right up.
was told buy a repair person to check the door micro switches as it was a common problem. removed the top plastic air grill to get access to the screw that holds in place the control cover. After unplugging the unit, i took out the (2) screws that held in the switches and removed them (3). One switch was a bit melted so i tested it with a
... Read more 12 volt battery and it was bad. Ordered a new one from Part select and got it fast . Works great .
After unplugging the unit remove the control face buy removing the screws. All three door switchs are on a bracket on the left. Remove the two screws holding the bracket in place and pull out. Disconnect the wires from the three switches and test each switch indivually to determine the bad one. I used a multimeter set on ohms.Replace the
... Read morebad switch with the new one and replace all the wires. Reassemble the unit and you are good to go.