Models > EI28BS51IW0

EI28BS51IW0 Electrolux Refrigerator - Overview

Get Parts and Repair Help for EI28BS51IW0

If you know the refrigerator repair part you need, you can browse the list of all parts on the EI28BS51IW0, or you can search by name or part description. You can also find your part by where it is located on the EI28BS51IW0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Air Filter




Water Inlet Valve


Hinge Mounting Hexagonal Screw

Sold individually.


Adjustable Leveling Foot - Black

Sold Individually.


SCREW-#8-18 X 1/2


Evaporator Fan Blade


Touch Up Paint

This 18 ml bottle of white appliance touch up paint is a little over two inches tall. It can be used for refrigerators, microwaves, ranges, clothes dryers, and freezers.


Hexagonal Screw


Pan Head Screw

Sold Individually. Order quantity required.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Was not filling the ice tray full.

  • Customer: Orville from Garland TX
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 12 of 18 people found this instruction helpful
I had put in a new ice maker and it still had the problem, (I needed the Ice maker anyway) I installed the vale and while I was at it I put a five year filter on the water line that went from the value to the Ice maker, it took less than one hours, the ice is making like it did when it was new, I could not be more please at theis time. Thanks for your Intere... read more

Motor had failed due to ice ejector frozen to tray.

  • Customer: Christopher from Middletown CT
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 4 of 5 people found this instruction helpful
Removed the ice maker. Took off the cover and proceed to remove the motor. The only trick was to dis-assemble the electrical connector to replace the wires. I chose to do this rather than splice the new motor into the existing system and it was simple with a little patience.

Easiest repair to make and half / third the money for a new ice maker. ... read more

light switch did not operate correctly

  • Customer: Jeff from Lakeville MN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 4 of 5 people found this instruction helpful
Piece of cake! The new part just plugged in to socket and back into fridge frame. Appreciated how easy it was to order this part. read more