Quick Question!

Have you ever purchased from PartSelect.com before?

Models > EI27BS26JS1

EI27BS26JS1 Electrolux Refrigerator - Overview

Get Parts and Repair Help for EI27BS26JS1

If you know the refrigerator repair part you need, you can browse the list of all parts on the EI27BS26JS1, or you can search by name or part description. You can also find your part by where it is located on the EI27BS26JS1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for EI27BS26JS1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$16.62

Air Filter

This air filter system for refrigerators eliminates odors and any impurities. It does this by neutralizing and removing odor-causing molecules. For best results, it is important to...

Order within the next 11 hrs and your part ships today!
$0.72

Screw

Order within the next 11 hrs and your part ships today!
$28.37

Evaporator Fan Blade

This evaporator fan blade is a genuine OEM part that is sourced directly from the manufacturer. The evaporator fan blade circulates air through the refrigerator to control the amou...

Order within the next 11 hrs and your part ships today!
$6.17

SCREW-SHOULDER

Sold individually.

Order within the next 11 hrs and your part ships today!
$8.82

GEAR

The ejector drive gear is a part for your refrigerator. This icemaker drive gear is for the ejector blades. The part rotates the cube ejector arm, which cycles the icemaker and pus...

Order within the next 11 hrs and your part ships today!
$9.62

Adjustable Leveling Foot - Black

This part could be found underneath a fridge, dryer, or freezer. The original foot may be cracked, broken, or perhaps missing altogether. If you notice the appliance is uneven to the floor or wobbling, it may indicate that the levelling foot needs to be replaced. You will need pliers and a block of wood to perform this task. There will be one adjustable foot found in the package. Lift the dryer and place the wood to keep it propped up. You may need to use the pliers to remove the old foot. Screw the new foot into place using your hand. Once the new leveling foot is in place, lift the appliance and remove the block. Test the machine out to ensure it is now sitting level.

Order within the next 11 hrs and your part ships today!
$73.56

Water Filter Base

Order within the next 11 hrs and your part ships today!
$6.42

Hexagonal Screw

Sold individually.

Order within the next 11 hrs and your part ships today!
$6.61

SCREW

Sold individually.

Order within the next 11 hrs and your part ships today!
$67.15

Water Filter

Order within the next 11 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Ice maker wouldn't change from crushed to cubed ice

  • Customer: robert from sioux falls, SD
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 49 of 63 people found this instruction helpful
First I pulled the ice tray out so I could see the solenoid housing/ice tray support(1 unit). Below the ice tray there are 2 screws that hold the solenoid housing/ice tray support. After removing those the assembly lifts up so you can see the wiring harness to disconnect. I pulled it out and removed the 2 screws to open it up. There is 2 screws holding t... read more

No water flow to in-door water/ice dispenser

  • Customer: Richard from St. Louis, MO
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 25 of 28 people found this instruction helpful
Unscrewed the water line cover. Removed the platic case around the water filter base. Everything went well until I tried to remove the two water hoses. After I finally figured out that I had to push in the release washer while pulling the hoses out, things went well. Unfortunately it took several hours of wasted time and several searches on the internet ... read more

Water was leaking from the filter area when in-door water dispenser used

  • Customer: Todd from Gotha, FL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 12 of 16 people found this instruction helpful
Silly me. It couldn't possibly be the filter because it's worked for the last 9 months with no problems. Decided to replace the water filter base first. Repair was easy. I saw someone had trouble removing tubes from old base and I gave it a couple of tries to no avail so decided to cut the lines instead. Made it even easier. After repair, water continued to ... read more