Models > EI27BS26JB1

EI27BS26JB1 Electrolux Refrigerator - Overview

Get Parts and Repair Help for EI27BS26JB1

If you know the refrigerator repair part you need, you can browse the list of all parts on the EI27BS26JB1, or you can search by name or part description. You can also find your part by where it is located on the EI27BS26JB1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$16.25

Air Filter

$5.14

Screw

$5.27

Hinge Mounting Hexagonal Screw

Sold individually.

$8.00

Adjustable Leveling Foot - Black

Sold Individually.

$63.79

Water Filter Base

$23.91

Evaporator Fan Blade

$6.16

LIGHT BULB

$5.20

Hexagonal Screw

$39.91

Cube/Crushed Solenoid with Arm

$4.95

SCREW-SHOULDER

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Ice maker wouldn't change from crushed to cubed ice

  • Customer: robert from sioux falls SD
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 22 of 28 people found this instruction helpful
First I pulled the ice tray out so I could see the solenoid housing/ice tray support(1 unit). Below the ice tray there are 2 screws that hold the solenoid housing/ice tray support. After removing those the assembly lifts up so you can see the wiring harness to disconnect. I pulled it out and removed the 2 screws to open it up. There is 2 screws holding t... read more

No water flow to in-door water/ice dispenser

  • Customer: Richard from St. Louis MO
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 15 of 17 people found this instruction helpful
Unscrewed the water line cover. Removed the platic case around the water filter base. Everything went well until I tried to remove the two water hoses. After I finally figured out that I had to push in the release washer while pulling the hoses out, things went well. Unfortunately it took several hours of wasted time and several searches on the internet ... read more

Water was leaking from the filter area when in-door water dispenser used

  • Customer: Todd from Gotha FL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 6 of 9 people found this instruction helpful
Silly me. It couldn't possibly be the filter because it's worked for the last 9 months with no problems. Decided to replace the water filter base first. Repair was easy. I saw someone had trouble removing tubes from old base and I gave it a couple of tries to no avail so decided to cut the lines instead. Made it even easier. After repair, water continued to ... read more