Quick Question!

Have you ever purchased from PartSelect.com before?

Models > EI26SS55GS0 > Parts

EI26SS55GS0 Electrolux Refrigerator - Parts

All parts for the Electrolux Refrigerator EI26SS55GS0

Below is a list of all parts for the Electrolux Refrigerator EI26SS55GS0 - Side-by-side. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the EI26SS55GS0
1-14 of 302
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$59.10

Water Inlet Valve

The water inlet valve is also known as the water inlet valve assembly and is compatible with your refrigerator. The function of this part is to release water from the supply line w...

$14.48

Defrost Thermostat Kit

If you find that there is excessive frost in your freezer, or the freezer will not defrost, you may need to replace the defrost thermostat. The defrost thermostat kit comes with the clip, leads, and heat shrink. To access the defrost thermostat for this repair, you will need to remove your freezer shelves, as well as the back panel of your freezer. To complete this repair, you will need a 1/4-inch nut driver, a set of wire strippers and crimpers, and a heat gun or blow dryer. Before you begin this repair, be sure to disconnect the power source from the appliance.

$97.59

Ice Maker with Cover - 8 Cube

This Frigidaire ice maker includes the ice mold and control device. The ice maker receives water from the water inlet valve and stores water in the ice mold until it freezes. Ice i...

$28.41

Run Capacitor

The run capacitor helps the compressor kick on and off while maintaining a constant temperature in your fridge and freezer. You may need to replace your run capacitor if your refrigerator or freezer section will not start, if they are too warm, or if your refrigerator has become too noisy. Replacing the run capacitor is a relatively easy project. For this repair you will only need a 1/4 inch nut driver and needle nose pliers. Remember to disconnect the power and water supply line to the unit before you begin this repair. For full step by step instructions, simply click on the video below.

$29.53

Dispenser Crusher Housing

This dispenser crusher housing may also be known as a refrigerator ice crusher housing, and is compatible with your refrigerator. The function of the dispenser crusher housing is t...

$5.59

CLIP-SLIDE

$37.67

Crisper Glass Insert

$7.30

Screw

This screw is sold individually.

$7.72

DRUM

This part helps push the ice threw the front plate to be crushed.

$31.27

Drive Blade

The drive blade helps rotate out cubed or crushed ice.

$29.05

Pan Cover Insert

Glass Only. Frame not included.

$5.52

CLIP-SLIDE

$5.96

SCREW-SHOULDER

Sold individually.

$0.54

SCREW-#8-18 X 1/2

All Parts for the EI26SS55GS0
1-14 of 302