Models > EI24WC75HS0

EI24WC75HS0 Electrolux Wine and Beverage Cooler - Overview

Get Parts and Repair Help for EI24WC75HS0

If you know the wine and beverage cooler repair part you need, you can browse the list of all parts on the EI24WC75HS0, or you can search by name or part description. You can also find your part by where it is located on the EI24WC75HS0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your wine and beverage cooler. We’ve also included any installation videos we have for EI24WC75HS0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$19.35

Run Capacitor

This part is attached to the compressor. It helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.

$16.25

Air Filter

$8.86

Fan Blade

$4.95

SCREW-SHOULDER

$5.52

Hex Head Screw

$5.27

SCREW

$8.70

SCREW-SET

$23.91

SENSOR

$51.32

MOTOR

$29.73

CORD-SERVICE

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broke a blade off of the fan

  • Customer: Milton from Camp Hill PA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Wrench(Adjustable)
  • 27 of 28 people found this instruction helpful
When cleaning the coils on your refrigerator always remember rule number 1, unplug it first. I was cleaning the coils and hit the fan blade while it was moving with a brush, thus breaking off one of the fan blades. I ordered a new fan and installed it in about 15 minutes. Very easy repair. read more

Brand new refrigerator, but evaporator fan blade broken, causing considerable vibration and noise.

  • Customer: John from Morgantown WV
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Wrench(Adjustable)
  • 11 of 14 people found this instruction helpful
Really, really, really easy:
1.Unplug refrigerator (electrical safety).
2.Remove cardboard cover at bottom of refrigerator (two short self-tapping bolts) with a wrench.
3.Pull old fan blade off fan motor shaft (just held on by a compression fitting--no tools needed).
4.Push new fan blade on shaft.
5. Replace cardboard cover.
6.... read more

just quit working

  • Customer: Denise from Lowell MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 9 of 11 people found this instruction helpful
Bought a new
capacitor. read more