Models > EI23CS55GW1

EI23CS55GW1 Electrolux Refrigerator - Overview

Get Parts and Repair Help for EI23CS55GW1

If you know the refrigerator repair part you need, you can browse the list of all parts on the EI23CS55GW1, or you can search by name or part description. You can also find your part by where it is located on the EI23CS55GW1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for EI23CS55GW1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$58.11

Water Inlet Valve

This part may appear different than the original, but is an authorized manufacturer replacement. This part releases water from the supply line when it's activated.

$11.50

Defrost Thermostat Kit

This kit includes the clip, leads and heat shrink.

$26.71

Dispenser Crusher Housing

This part may look different or be a different color than the original, but will fit and function the same as the original part.

$120.46

Ice Maker

The mold heater is an electrical device that thaws the ice quickly so it can be released from the icemaker mold.

$24.55

Evaporator Fan Blade

$6.13

Screw

This screw is sold individually.

$33.61

Crisper Glass Insert

$25.20

Pan Cover Insert

Glass Only. Frame not included.

$5.41

Hexagonal Screw

Sold individually.

$65.50

Water Filter Base

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

water leaking out of refrigerator

  • Customer: Jose from Alexandria VA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Wrench(Adjustable)
  • 229 of 276 people found this instruction helpful
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the valve assembly in p... read more

Running but not cooling off and frost in the back of the freezer

  • Customer: Leo from Bentonville AR
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 158 of 196 people found this instruction helpful
Unplugged the refrigerator. Removed the 4 hex head screws on the lower back panel at the back of the freezer. Used a blow dryer to defrost the pipes and area surrounding the thermostat. Unplug the connection from the back of the freezer, unplug the 2 wires, one that goes to the heater, one that comes from power. Unclip the thermostat from the pipe and no... read more

icemaker stopped making ice

  • Customer: David from New Bern NC
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 142 of 167 people found this instruction helpful
Even though my wife said that our icemaker broke, there was actually nothing wrong with it. It was the valve that let water flow in during the 'harvest' cycle.
A real easy way to test the icemaker without voltage and current measurements, is to fill the tray by hand with a little cup of water; wait till the water freezes and see if the maker dumped the ... read more