Quick Question!

Have you ever purchased from PartSelect.com before?

Models > EI23BC36IW1 > Parts

EI23BC36IW1 Electrolux Refrigerator - Parts

All parts for the Electrolux Refrigerator EI23BC36IW1

Below is a list of all parts for the Electrolux Refrigerator EI23BC36IW1. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the EI23BC36IW1
1-14 of 280
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$17.10

Air Filter

This air filter system for refrigerators eliminates odors and any impurities. It does this by neutralizing and removing odor-causing molecules. For best results, it is important to...

$22.39

Water Inlet Valve

If you notice that the ice maker in your refrigerator is leaking or is not making or dispensing ice, you may need to replace the water inlet valve. When energized, the water inlet valve releases water from the supply line into the ice mold. The water inlet valve is in the back of your refrigerator so you will need to pull the fridge out from the wall before completing this repair. To complete this job, you will need a 1/2 inch wrench, a 1/4 inch nut driver and a utility knife. If your old inlet valve has a screw-in fitting, you may need to simply cut the end of the hose to fit in the new part. Be sure to disconnect both the water and power supply from the refrigerator prior to beginning this repair.

$0.76

Screw

$29.21

Evaporator Fan Blade

This evaporator fan blade is a genuine OEM part that is sourced directly from the manufacturer. The evaporator fan blade circulates air through the refrigerator to control the amount of cold air goes that goes to internal compartments of the unit. It may need to be replaced if the fridge is noisy or not cold enough. This part is made of plastic and is sold individually. It will be necessary to disconnect power to the refrigerator and empty the freezer compartment of the refrigerator. The tools needed to complete this repair are a 1/4 inch nut driver and a pair of needle nose pliers.

$6.34

SCREW-SHOULDER

Sold individually.

$9.07

GEAR

The ejector drive gear is a part for your refrigerator. This icemaker drive gear is for the ejector blades. The part rotates the cube ejector arm, which cycles the icemaker and pushes the cubes out and into the ice bucket, ready for the ice to be used. The outside diameter of this piece is almost two inches by two inches. The reason for needing to replace your gear is if the current one is broken/missing a tooth, or if your icemaker is not dispensing ice and is noisy.

$9.91

Adjustable Leveling Foot - Black

This part could be found underneath a fridge, dryer, or freezer. The original foot may be cracked, broken, or perhaps missing altogether. If you notice the appliance is uneven to t...

$31.93

Light Switch

$6.92

Pan Head Screw

Sold Individually. Order quantity required.

$6.69

Hexagonal Screw

Sold individually.

$6.80

SCREW

Sold individually.

$69.10

Water Filter

$30.66

Front Roller

$11.10

SCREW-SET

All Parts for the EI23BC36IW1
1-14 of 280