Models > EHT-345

EHT-345 Caloric Range - Overview

Get Parts and Repair Help for EHT-345

If you know the range repair part you need, you can browse the list of all parts on the EHT-345, or you can search by name or part description. You can also find your part by where it is located on the EHT-345 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$3.96

Drip Bowl - 6"

$37.18

Broil Element

$47.03

ELMNT-SURF

$27.77

Hinge Kit - Right Side

TRACK,STORAGE DRAWER-

$3.83

CABLE- CLI

$3.83

CLAMP

THERMOSTAT

TRACK, STORAGE DRAWER-R.H.

INDICATOR LIGHT

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broiler burned out

  • Customer: David from Lewisburg TN
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers, Socket set
  • 4 of 4 people found this instruction helpful
The Job didn’t take very long at all. I pulled the unit out and unplug it before I started the repair. I had to remove the back two access cover plates to get to the two wire leads that connect the broiler. I don’t believe there was enough wire to be able to do it all from the front side. Next I disconnected the two wires that connected it while remembering ... read more

Rivet broke on the right side oven door hinge

  • Customer: Roger from Pleasanton CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 3 of 4 people found this instruction helpful
Regarding my right side oven door hinge replacement, P/N PS2172201

After reading that other people had trouble threading the screws into the new hinge, I looked at the drilled mounting holes in the new hinge. Neither hole was threaded. The smaller hole used a self tapping sheet metal screw which works fine. The larger hole gets a machine screw and... read more

i sat a tupperware bowl on a hot burner and it stuck to the burner so i had to replace it

  • Customer: judy from palatine IL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 2 of 2 people found this instruction helpful
just plugged it in! read more