Models > EHS341

EHS341 Caloric Range - Overview

Get Parts and Repair Help for EHS341

If you know the range repair part you need, you can browse the list of all parts on the EHS341, or you can search by name or part description. You can also find your part by where it is located on the EHS341 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$107.16

Electric Oven Thermostat

This part establishes and maintains the internal temperature of the oven cavity. The temperature of this thermostat ranges from 150 degrees Fahrenheit to 550 degrees Fahrenheit.

$30.29

Oven Seal - Top or Bottom

This piece of oven door seal has a metal hook on each end. This seal is compatible with the top and the bottom of the oven door window.

$18.62

Oven Sides Seal

It is made of black rubber and has a metal hook in each end.

$37.32

Bake Element

The terminals are twenty-one inches apart and have a depth of two inches.

$3.71

SPRING, OVEN DOOR, L.

$43.52

BROIL ELEMENT

This electric oven broil element is 8-1/2 inches wide and 16 inches long. The terminal depth is 1-3/8 inches. Use this broil element for your Amana brand electric range or oven.

OVEN RACK

KNOB, THERMOSTAT

OUTER DOOR GLASS

SUB 88069CG, DOOR BAC

Common Symptoms of the EHS341 [Viewing 1 of 40]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven seals got dried and cracked

  • Customer: Brent from Goleta CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 15 of 19 people found this instruction helpful
The top seal was too long (my fault, ordered wrong length seal) so I had to cut it and high-temp epoxy the metal hook into the end. Overall pretty easy fix. read more

Oven wouldn't heat

  • Customer: Jack from Rouses Point NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 4 of 6 people found this instruction helpful
I disconnected the oven power, then removed the two screws that hold the element in place, then I pulled the old element out, and connected the new element to the two wires, and reinstalled the two screws. PartSelect provides easy part selection, very quick delivery, and is my first choice for hard to find parts. I have used them in the past and am always pl... read more

Bake element broke in two THANKSGIVING Morining

  • Customer: Susan from Rowley MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 3 people found this instruction helpful
My husband simply unscrewed the screws on each side and put on the new bake element. Just need to remember to UNPLUG the stove as he had a few sparks at first . . . other than that, it was simple. Thanks!!! read more