Quick Question!

Have you ever purchased from PartSelect.com before?

Models > EHS267 Maytag

EHS267 Caloric Range - Overview

Get Parts and Repair Help for EHS267

If you know the range repair part you need, you can browse the list of all parts on the EHS267, or you can search by name or part description. You can also find your part by where it is located on the EHS267 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$20.03

Side Oven Door Seal

This single oven door side seal is fourteen inches long. It is made of black rubber and it has a metal hook in each end.

$55.82

Bake Element - 2400W 250V

This element is used on 24" ranges that have a screw in connection.

$109.18

Electric Oven Thermostat

The temperature of this thermostat ranges from 150 degrees Fahrenheit to 550 degrees Fahrenheit. When your oven is baking, this thermostat is allowing for 17 amps of energy and whe...

$47.81

Broil Element (16" long x 8.5" wide)

This electric oven broil element is 8-1/2 inches wide and 16 inches long. The terminal depth is 1-3/8 inches. Use this broil element for your Amana brand electric range or oven.

SPRING, OVEN DOOR, L.

CLOCK

KNOB, THERMOSTAT

ALMOND (2)

GLASS, BACKGUARD

LINER OVEN DOOR

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The top seal on my Range broke

  • Customer: Clara from Missouri City, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
The repair was really easy! I read a review where the gentleman had order the wrong size and that had me a little worried because I did not specify a size. There were three seals on my range so I figured if one broke I might as well replace all three. When I received the seals they were the right size and it took me less than five minutes to put them on. ... read more

Top oven seal sagging, no longer seals

  • Customer: Martin from Blanca, CO
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Used 2 side seals to make a new top seal (no longer available). Cut the 2 new side seals to provide about 1/2" less length than the old top seal. Removed one of the end hooks and straightened the hook, removed the old silicone from the hook. Used high temperature silicone and the old hook to splice the cut ends together. Let cure over-night and reinstalled... read more

Side seals were normally deteriorated on old wall oven

  • Customer: Gerard from Morristown, NJ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I used the 14 in. Seals which are shown in their packaging as folded in a U - shape. The two tabs on either end slipped into their retainer holes easily requiring just enough stretching to flatten them. It all all took less than a minute, including opening the package. Very satisfying. read more