Models > EHD345

EHD345 Caloric Range - Overview

Get Parts and Repair Help for EHD345

If you know the range repair part you need, you can browse the list of all parts on the EHD345, or you can search by name or part description. You can also find your part by where it is located on the EHD345 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$3.96

Drip Bowl - 6"

$23.70

Oven Rack

$27.77

Hinge Kit - Right Side

$2.70

Nut

$66.25

Burner Control Switch Kit - 8"

HINGE, TOP

$3.84

CABLE- CLI

DISCONTINUED

HINGE, BOTTOM

SEAL, OVEN DOOR

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Rivet broke on the right side oven door hinge

  • Customer: Roger from Pleasanton CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 3 of 4 people found this instruction helpful
Regarding my right side oven door hinge replacement, P/N PS2172201

After reading that other people had trouble threading the screws into the new hinge, I looked at the drilled mounting holes in the new hinge. Neither hole was threaded. The smaller hole used a self tapping sheet metal screw which works fine. The larger hole gets a machine screw and... read more

Old hinge snapped a rivet. It could no longer hold the weight of the door.

  • Customer: Frank from Farmingdale NY
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 2 of 2 people found this instruction helpful
I removed the two screws and pryed out the old hinge. I then put in the new hinge. The new one fit well. I went to screw it in with the supplied screws. The screws not only did not fit the hole tapped in the hinge (too big, different tread) but both screws were different from each other. They were different sizes and different types all together. I tried re-... read more

Son accidentally melted alot of plastic in oven.

  • Customer: Virginia from Holts Summit MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 3 people found this instruction helpful
I took out ruined racks. Cleaned the oven, getting rid of all the melted plastic. Once oven was sparkling clean, I slid in the new racks I bought from here. (The easiest part).

* * * *
I'm very thankful to have found this site. My oven has been "out of order" for over 3 years. It's so nice to be able to use it again! =) read more