Models
>
EFMC527UTT2
EFMC527UTT2 Frigidaire Dryer - Overview
Sections of the EFMC527UTT2
[Viewing 5 of 5]Keep searches simple, eg. "belt" or "pump".
High Limit Thermostat
PartSelect #: PS446428
Manufacturer #: 3204267
This high limit thermostat is used in a dryer and monitors the temperature to make sure it does not exceed 260 degrees Fahrenheit. When your dryer temperature reaches 260 it will cut it out and only c...
$85.85
In Stock
Screw
PartSelect #: PS417463
Manufacturer #: 131302800
This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. T...
$11.21
In Stock
High Temperature Adhesive
PartSelect #: PS474458
Manufacturer #: 5308027429
This high temperature adhesive is used for installing felt and rubber seals on dryers. The tube contains 1 ounce of product. This adhesive is made to withstand extremely hot temperatures. Before apply...
$47.69
In Stock
Belt
PartSelect #: PS2349294
Manufacturer #: 134719300
This dryer belt is one of the most important parts in a dryer and is what allows the dryer drum to spin/rotate. If the dryer belt is damaged or broken, the drum will not spin or will have difficulty i...
$57.93
In Stock
FILTER ASSEMBLY
PartSelect #: PS16620745
Manufacturer #: 5304529766
Lint filter assembly. Part has been redesigned. If you are replacing this filter you may also need to replace grille as well. Please see model diagram for correct grille.
$85.66
In Stock
Heating Element Assembly
PartSelect #: PS2367792
Manufacturer #: 137114000
This element is strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current and as a result, the wire heats up. The heat produced is u...
$210.30
In Stock
MOTOR
PartSelect #: PS16620747
Manufacturer #: 5304529782
This drive motor includes the pulley for the dryer drum belt. The motor has reverse threads for the blower wheel. Please disconnect the power before starting your repair. This is a genuine OEM part.
$193.95
In Stock
Screw
PartSelect #: PS417260
Manufacturer #: 131243700
Sold Individually. Pan Head Screw - 8-18ab X 0.375
$7.24
In Stock
Questions And Answers for EFMC527UTT2
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kelvin
November 19, 2023
internal lights do not turn on when door is opened.and power applied.
the control panel lights up when the power button is pressed.
the drum does not turn by hand.
can anyone help answer these questions?
For model number EFMC527UTT2
Hello Kelvin, thank you for the great question. According to our research, the drum light turn on whenever the door is opened to illuminate the drum during loading and unloading. Closing the door turns off the light. If light does not come on when the door is opened. The issue is most probably with the drum light assembly. We would suggest replacing the drum light assembly, part number PS12728900, to fix the issue. It is normal for control panel lights to turn on when the power button is pressed. You have mentioned that the drum does not turn by hand. If your drum turns by hand, it means the drive belt is broken. We hope that helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Erik
March 21, 2024
Internal lights do not turn on when door is opened Power is on. Drum will spin, looked at belt but no issues or wear the belt it self. Getting error code E HD in Diagnostic mode
For model number EFMC527UTT2
Hi Erik, thank you for reaching out. We would suggest checking the door switch first. If it is fine, the issue could be with the board assembly, part number PS12728916. You may need to replace it to fix the issue. We hope that helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Common Symptoms of the EFMC527UTT2
[Viewing 4 of 4]Noisy
Fixed by
these parts
these parts
Show All
Too hot
Fixed by
these parts
these parts
Show All
Marks left on clothes
Fixed by
these parts
these parts
Show All
Drum Not Spinning
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Cloths not drying
Removed the back panel and the exhaust hose.removed the heater element and changed the thermostat wire was melted cut damaged part of wire soldered and rapped with black electrical tap
Parts Used:
-
keith from ELLENVILLE, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers, Socket set
5 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noisy squeaky dryer
Main problem was the bearing, replaced the belt and felt seal as well
The video instruction was very helpful
Was easy with basic mechanical aptitude
Dryer running great now
All parts from Partselect.com
Have ordered from them before and would order from them again
The video instruction was very helpful
Was easy with basic mechanical aptitude
Dryer running great now
All parts from Partselect.com
Have ordered from them before and would order from them again
Parts Used:
-
Dave from SAN FRANCISCO, CA
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The thermostat had deteriorated and no heat
Had to loosen drum and move it forward to get at switch. Didn’t have to remove belt.
Parts Used:
-
David from ROUND TOP, NY
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!