Models > EF36IWFSS Dacor

EF36IWFSS Dacor Refrigerator - Overview

Get Parts and Repair Help for EF36IWFSS

If you know the refrigerator repair part you need, you can browse the list of all parts on the EF36IWFSS, or you can search by name or part description. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for EF36IWFSS parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.58

Light Bulb - 40W

Sold individually.

Order within the next 10 hrs and your part ships today!
$51.75

Crisper Drawer

NOTE: As per the manufacture the crisper drawer has been updated from the original. A new crisper cover may need to be purchased for the drawers to work.

Order within the next 10 hrs and your part ships today!
$46.43

Capacitor

This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.

Order within the next 10 hrs and your part ships today!
$20.29

Pantry End Cap - Left Side

Sold individually.

Order within the next 10 hrs and your part ships today!
$24.26

P-Trap Drain Tube Kit

Also known as a duck bill. This kit includes the tube extension piece and spacer.

Order within the next 10 hrs and your part ships today!
$6.72

Water Filter Bypass Cap

This cap is used when bypassing the filter.

Order within the next 10 hrs and your part ships today!
$18.84

Light Switch

This part turns on the light when the door is opened.

Order within the next 10 hrs and your part ships today!
$37.67

Kickplate Grille - Apollo Grey

This kickplate grille is attached to the bottom of the refrigerator.

Order within the next 10 hrs and your part ships today!
$24.98

Thermostat with Clips

This part is also known as the cycling thermostat and this bi-metal device controls the activation of the icemaker ejection cycle.

Order within the next 10 hrs and your part ships today!
$111.63

Door Gasket - Apollo Grey

This door gasket is used to make an air-tight seal for the cabinet when the door is closed.

Order within the next 10 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

light on to order water filter

  • Customer: Douglas from Byron, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 614 of 649 people found this instruction helpful
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute. read more

My refrigerator stopped cooling and the freezer section stopped freezing

  • Customer: garth from forest lake, MN
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 161 of 176 people found this instruction helpful
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck let's give her a shot ... read more

Removing the existing filter by rotating as directed and then dislodging from 'docking' station proved difficult. Turns out, the old filter is under a bit of vacuum pressure and getting the unit to separate or release was a challenge.

  • Customer: Jake from Novato, CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 195 of 285 people found this instruction helpful
I removed the drop-down outer housing by gently prying the sides of the two pivot pins at the rear. This gave me move 'room' to grip and slightly rotate then pull the old filter forward and away from the tight suction connection. I was concerned that I would be too forceful for the plastic assemblies and would break something; deliberate motions and a steady... read more