EF36IWFSS Dacor Refrigerator - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
jar of pickles fell on the glass door of the pantry
removed the pantry drawer, pushed tabs holding the door, and door came right off. new door went on whole repair took no more than 5 minutes. Longest time took arguing with my wife on how the door came off, and she was right and I was wrong
Parts Used:
-
Frank from Simi Valley, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pull out draw close top hinge broke
-
Tom from Calabasaa, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken plastic on end cap
I removed three screws and replaced the part. It was very quick and easy>
Parts Used:
-
Cheryl from Boyne City, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken drawer lid in refrigerator
-
Dan from Spotsylvania, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pantry Drawer Broke
I ordered the part, you shipped it quickly and I replaced it. I would absolutely recommend your company to anyone. I was very impressed. This is the second part I have ordered from you.
Parts Used:
-
Joe from Virginia Beach, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
see through lid separated from lid frame
pulled one side loose than the other. did the opposite to install new lid
Parts Used:
-
Thomas from Manassas, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
A piece of a component broke off which held on the draw cover.
First I removed the screws from the draw track and screwed on the track to the new part. I then used a socket wrench to remove the component. Once removed, I used the socket wrench to screw in the new component. Finally I placed the cover back on the draw.
Parts Used:
-
Charles from Medfield, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken hinge on meat drawer lid
First I removed the drawers under the lid and then the drawers over the lid. I also removed the glass shelving and shelf brackets. Then I removed the three screws holding the endcap and then replaced the endcap with a new one. Then I reassembled the shelves and drawers.
Parts Used:
-
John from Montgomery, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drawer lid was broken/cracked
I slid the drawer lid from the pins by pushing in on the top sides of the lide and put the new one in by lining up the pins and holes and 'snap'.
Parts Used:
-
Yvonne from Haverhill, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken round clasp on end cap, and plastic glass cracked in lid
Most of the time was just removing the food and trays and cleaning up a bit. 3 nuts removed and re attached with a small socket wrench. No wires or anything. The lid then just simply snapped back into place.
Parts Used:
-
Charles from Longmont, CO
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pin to open and close door broke
I removed the upper two storage drawers and glass shelf then the 3 hex bolts on the endcap and then 2 phillips screws on the drawer retractor. Then I reversed the process for reassembly.
Parts Used:
-
Dar from Shell Knob, MO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The old support hinge holding a drawer door broke
I had to half emprty the refrigerator, take away a shelf, and the drawer in order to hace access to the bolts. I simply unscrewed the bolts, took the old endcap away and replaced it with the piece I ordered. It was very simple to do.
Parts Used:
-
Rafael from Bethesda, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
cracked plexi glass in meat drawer lid
Took off the old one and snapped in the new one! Took less than a minute.
Parts Used:
-
Lisa from Scituate, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I broke off the small piece holding the lid on.
No need to call a service/parts repairman. My husband quickly installed the new left end cap. He just removed the crisper drawers and bottom drawer parts. Unscrewed old part; screwed in the new part. Easy.
Parts Used:
-
Christine from Billings, MT
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pantry Drawer window broke
Removed old lid and installed new lid - no tools required.
Parts Used:
-
Helen from Randallstown, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!