Models > EEV163CW1

EEV163CW1 Whirlpool Freezer - Overview

Get Parts and Repair Help for EEV163CW1

If you know the freezer repair part you need, you can browse the list of all parts on the EEV163CW1, or you can search by name or part description. You can also find your part by where it is located on the EEV163CW1 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the EEV163CW1 [Viewing 5 of 5]

$5.54

Touch-Up Paint - White

$2.70

Cover Screw

Sold individually.

$2.03

Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.

$8.17

Spray Paint - 12 oz. - White

$4.46

Freezer Door Key

$2.70

SCREW

$2.70

Screw

This screw is sold individually.

$2.23

Hinge Washer

$27.08

Adhesive Cement

Also known as Alumilastic Cement.

$3.83

SCREW

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Scratches in Surface

  • Customer: Michelle from Richardson TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 10 of 12 people found this instruction helpful
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great. read more

No leveling legs

  • Customer: stephen from montgomery NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Wrench(Adjustable)
  • 1 of 2 people found this instruction helpful
Ordered the leveling bolts, very fast shipping, parts correct as shown. Purchased a condo by the shore, frige had no levelers, they went in smoothly & was done in no time.
Steve read more

fans and lights worked in refrigerator but not cooling

  • Customer: James from Blue Springs MO
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 5 of 14 people found this instruction helpful
By going on line and going to PartsSelect, the check out procedures traced the problem to the start/overload relay. Using a nut driver, I removed the back panel and using their instruction, I installed the overload relay. On the next to the last step on the instruction, the sealer in the kit was already hardened. I called the service hot line at PartsSel... read more