Quick Question!

Have you ever purchased from PartSelect.com before?

Models > EEV162LW1

EEV162LW1 Whirlpool Freezer - Overview

Get Parts and Repair Help for EEV162LW1

If you know the freezer repair part you need, you can browse the list of all parts on the EEV162LW1, or you can search by name or part description. You can also find your part by where it is located on the EEV162LW1 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the EEV162LW1

[Viewing 5 of 5]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$7.22

Touch-Up Paint - White

18ml

$11.07

Spray Paint - 12 oz. - White

$6.80

Touch-up Paint - Black

16ml

$18.42

Leveling Leg

Sold individually.

$67.62

Compressor Relay/Overload Kit

The start relay briefly boosts the compressor, and then shuts off as soon as the motor gets up to speed. The overload provides extra protection for the compressor motor.

$109.84

Door Gasket

This door gasket is used to seal the freezer door when closed.

$81.89

Thermostat Kit

$20.80

Spray Paint - Surperior Black

This is a 12oz can of black spray paint.

$22.95

PRIMER

$61.30

INSULATION

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Scratches in Surface

  • Customer: Michelle from Richardson, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 20 of 27 people found this instruction helpful
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great. read more

fans and lights worked in refrigerator but not cooling

  • Customer: James from Blue Springs, MO
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 7 of 18 people found this instruction helpful
By going on line and going to PartsSelect, the check out procedures traced the problem to the start/overload relay. Using a nut driver, I removed the back panel and using their instruction, I installed the overload relay. On the next to the last step on the instruction, the sealer in the kit was already hardened. I called the service hot line at PartsSel... read more

Both outside door handles turned very beige

  • Customer: Howard from Boynton Beach, FL
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 8 of 21 people found this instruction helpful
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discoloring refer handles.... read more