EDW6160N00SS General Electric Dishwasher - Instructions

Installed new rack assembly and it works fine. Thanks

Removed the screws holding the inner door panel from the door. I just flipped it over and used the weight of the removed panel to hold down the spring loaded door. I took note of the position of the old seal and then removed it. I cleaned away all of the accumulated soap residue. The new seal was positioned by just sliding it into place. I flipped the door panel over and replaced all of the attaching screws. Don't try to press the new seal into place. Slide it onto the lip of the door panel.

The diagram was very helpful to make identifying what parts were needed. Very prompt in sending the parts,in less than 24 hrs! Would highly recommend ordering from here.

removed original rack, inserted replacement.

I have NO skills, none...so if I can do this anyone can. I can't even do a puzzle, so this is the background with which I began. The wheels had been updated with a bit of a different mechanism that holds them (the axle I guess) onto the lower rack. All the things snapped into place. I was stunned I could do it---was going to wait for my husband but decided to take a stab at it....and it was easy and I did it. Now the dishwasher works well becauise i can roll the tray in and out!

Removed the old axle locks and replaced with the new ones. They work fine. They had impoved the wheel lock over the original ones. Thanks for the good & quick service.

I troubleshot the problem down to the 2 small interlock switches and the cover that protects them. They are directly behind the the door handle mechanism. The switches were shaky and the cover was bowed out. Ordered the 2 switches and the cover, next day mail. The delivery charges were more than the parts. Easy fix. Saved $90 for the repairman visit plus what ever he gets for his time and his cost for the parts.

It took no time at all to identify where the water was leaking from. I accessed a parts breakdown illustration of my dishwasher, identified the part, ordered it and three days later my leak was fixed. Hose and water inlet valve assembly was easy to swap out. I estimate I saved myself about $150.00 by doing it myself.

unscrewed old part and rescrewed new part...easy....works like a charm....saved lots of money from a service call. Parts select was a great company to work with...fast shipping. thanks

replaced the axles and the wheels

I have replaced the both control boarsd and now the micro swith and plunger still no avail. The dishwasher still will not come on, the cycle end light just keeps blinking and I can not get the dishwasher to allow any other cycle buttons to be used they just stay unlit.

Removed old part and clip on the new wheel

We tried cleaning the sprayer by unclogging the spray holes but it didn't last very long. I decided to see what it would cost to replace the piece. I have used this site before and love how easy it is to find the part you need. The sites have good pictures so you feel very good that you are ordering the correct part. They also have helpful suggestions for problem.. I ordered the part and it arrived two days later and we installed it right away...I started the dishwasher for a test run and forgot how loud it use to spray..The prices are also great just a service call from a repair man would of cost me triple what I got my new part.

Took pliers and removed old end caps, replaced rack/roller slides then put on new end caps. Was just that fast and easy. No problems. Doing it myself saved me a bundle of money. Thanks Partselect...just hope I won't need you for awhile. B. Williams

Removed old basket, put in recycle bin, placed new basket in dish washer. The damage to the original basket was my fault. I now know not to drop heavy knives point down into the basket.