Models > ED5VHGXMB10 > Instructions

ED5VHGXMB10 Whirlpool Refrigerator - Instructions

All Instructions for the ED5VHGXMB10
1726 - 1740 of 1976
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Iscles Hanging From Underside Of Icemaker & Frozen "Pudles" In The Ice Bin.
Previous to installing the new ice maker - I replaced the dual inlet water valve per the instruction video I found @ partselect website. That did not solve the problem <> I also adjusted the timer on the old ice maker down - per another video / which also did not solve the problem. Then I viewed the video on icemaker replacement - ordered the ice maker & 3 days and 15 minutes later <> the problem was fixed ! This web site is "fantastic" ! Thankyou partselect for your assistance ! ! !
Parts Used:
Replacement Ice Maker
  • NEAL from boyton beach, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Crisper draw broke
Package came in two days.I opened the box ,took the old draw out and slid the new draw in. Fixed in less than two minutes.I would definitely order from Parts Select again. Thanks for the prompt service
Parts Used:
Refrigerator Crisper Drawer with Humidity Control
  • thomas from garrison, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Ice guide was broken. A glued fix failed so it was time to replace.
Hardest part of the whole project was figuring out how to get the bezel off the door to expose the problem area. The rest was simply removal and replace parts. The actuator arm had epoxy on it from the attempted repair and had to be replaced. Easy fix. If you can use a screwdriver and pay attention of how it comes apart you can do this.
Parts Used:
Lever, Ice Dispenser (White) Ice Guide
  • Gordon from McKinney, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Clicking sound when opening door
Watched the video provided, then followed that procedure. Everything now works fine, no more clicking.
Parts Used:
Lower Door Closing Cam
  • mike from richardson, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Socket set
Was this instruction helpful to you?
Thank you for voting!
Noisy fan motor
Before I began I unplugged the electrical at the wall outlet. 1. Unscrewed the 4 mounting screws. 2. disconnected electrical at the motor. 3. removed the assembly. 4. mounted the new motor on the assembly as described in the instructions. Installed the assembly and reconnected the electrical. Works great, easy job!
Parts Used:
Condenser Fan Motor Kit
  • eBooks4u from Wimberley, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
Part Where Ice Maker Arm Fit In Broke Off
Took ice maker out all together we removed 4 to 5 screws had to remove axel to get the broken piece out and new one in my husband said it was easy in and out in about 15 minutes saved about 150. 00 Thanks partslect
Parts Used:
Water Fill Cup and Bearing
  • Yvonne from Worthington, IA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Door bin cracked.
No repair required. Just put the new bin in place.
Parts Used:
Refrigerator Door Shelf Bin - White
  • Gloria from Salem, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Feezer did not start well any more
Easy job due to great instruction video by PartSelect.
Parts Used:
Thermostat Assembly
  • Eric from Fort Myers, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
My grand-daughter broke the crisper drawer by slamming the refrigerator door while the drawer was open.
I took out the old drawer and inserted the new drawer in the same place! I wish all of life were that easy!
Parts Used:
Refrigerator Crisper Drawer with Humidity Control
  • Dotti from Vicksburg, MS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Frig not cooling.
After plugging in the new relay to no avail. I replaced the thermostat. That fixed the problem.
Parts Used:
Capacitor
  • Adam from Randolph, ME
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
Ice Maker would not eject ice from the ice tray.
Replaced the Ice Maker Control asssembly. Online video instruction were ectremely helpful. Time to repair was about 10-15 minutes and we have a funcioning ice maker again!
Parts Used:
Icemaker Control Assembly
  • Todd from Meridian, ID
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
condenser fan motor making alot of noise, possibly going out.
A bit of a tight squeeze for my hands, but very basic as I followed the instructions and watched the installation video. I only had the fridge unplugged for about 20 min..The fridge is as quiet, as it was brand new. The only tool I needed was the 1/4 inch socket wrench. A portable lantern was very helpful as well. Runs very quiet now, like new! Thx!!!
Parts Used:
Condenser Fan Motor Kit
  • rex from folsom, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
Was this instruction helpful to you?
Thank you for voting!
Ice maker failed tp produce ice
Removed three screws. Discount wire harness. Reverse proceedure for installation.
Parts Used:
Replacement Ice Maker
  • Peter from Punta Gorda, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
old icemaker went bad the form tray bubbled up and held cubes in place that stripped the drive gears at the motor end
Watch the u-tube video first ,Then read instructions that came with new unit ! so darn easy. unplug fridge, remove ice bin, clean and dry bin before putting back in service! stick flashlight in freezer loosen 2 top screws remove 1 bottom screw, unmount unit, unplug wire harness, remove icemaker and put on table, close freezer door !! , Remove sensor arm from old unit in down position and install in new unit. plug in new unit and reattach in freezer. replace ice bin and plug in fridge, that's it!, It took about 2 hours for the icemaker thermostat to say OK lets go had a load of ice in aprox 3 hours from finish. piece of cake. Jon
Parts Used:
Replacement Ice Maker
  • Jon from Barnegat, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Compressor fan and motor was load,barring was wobbling .
Fast after a little help from a friend
Parts Used:
Condenser Fan Motor Kit
  • William from Fox lake, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Socket set
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the ED5VHGXMB10
1726 - 1740 of 1976
Back to Top