Quick Question!

Have you ever purchased from PartSelect.com before?

Models > ED5VHGXMB10

ED5VHGXMB10 Whirlpool Refrigerator - Overview

Get Parts and Repair Help for ED5VHGXMB10

If you know the refrigerator repair part you need, you can browse the list of all parts on the ED5VHGXMB10, or you can search by name or part description. You can also find your part by where it is located on the ED5VHGXMB10 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for ED5VHGXMB10 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$54.97

Crisper Drawer with Humidity Control

The humidity control allows you to adjust the humidity within the crisper. This can extend the life of the vegetables and fruit.

$28.64

Door Bin

Sold individually.

$2.91

Light Bulb - 40W

Sold individually.

$7.60

Lower Door Closing Cam

This door closing cam is located on the bottom of the fridge/freezer.

$66.39

Water Filter

Fits all Whirlpool and KitchenAid refrigerators with a water filter located in the base grill below the door. For better filtering, try the PS373105. Also for Kenmore models starti...

$54.17

Meat Pan with Handle

Sold individually.

$69.21

Water Inlet Valve

Note: This valve has been updated by the manufacturer and NO longer includes the removable pre-filter bracket connector. Must be ordered separately part number WPW10445062.

$117.55

Replacement Ice Maker

***NOTE: Ice maker does NOT come with the bail or shut off arm. Must order them separately if required. It does come complete with flat and round plug wiring harness, the mounting hardware, and the instructions. Its harness can be reused. The ice maker will not fit refrigerators that have the ice auger mounted on the door.

$13.67

Control Bracket

This bracket holds the micro switches and the light in the freezer dispenser section.

$7.60

Door Cam - Black

Note: As per manufacture a new screw is needed to mount door cam. Sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Ice Maker quit working, I could manually cycle unit but then the water would overflow when unit was re-filling.

  • Customer: Max from Green Castle, IN
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 557 of 573 people found this instruction helpful
I backed out the 2 top screws about a quarter inch and then removed bottem screw with a quater inch nut driver. I then lifted Ice Maker clear of the two top screws and lowered it enough to unclip the power connection with a small screwdriver. The new Ice Maker was wired correctley for my refrigeator so all I had to do wea reconnect the power connection and... read more

was not making ice

  • Customer: GLENN from ORLAND PARK, IL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 565 of 614 people found this instruction helpful
take out ice bucket, just loosen the top 2 screws, remove the bottom screw, slide ice maker up & out, srewdriver to release wiring harness clip, reverse to put back in. was very simple. did not install water inlet kit yet. water under fridge stopped after i changed the ice maker. read more

Front wheel was broken when moving refrigerator

  • Customer: Jeff from Midway, GA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 492 of 513 people found this instruction helpful
Lifted the front up onto a scrap 2x4 to get it off the ground and it had 1 bolt that you removed to get the old item off and replace with new assymbly and 1 bolt to re attach. This sat broke for over a year becuase I thought it would be alot harder to fix, found the part on parts select ordered it recieved it in approx 2 days and had it fixed in less than 15... read more