ED5VHEXVB01 Whirlpool Refrigerator - Instructions

A new crisper pan solved the problem - it was easy! I just pulled out the old one and slid in the new one. I received the replacement part fast - I mean fast!

Take out the old pan and slide back the new one.

I just had to slide the old pan out and put the new one in. Very simple!

took old crisper out, loaded everything in new crisper.put back in.

I took out the old pan and put the new pan in. Total time, including opening the box was less than 5 minutes. Fits great. I was also very pleased at how quickly it was shipped.

watched the repair video on parts selct site which confirmed my thoughts about the repair procedures. Followed the simple instructions and used a little dab of vasaline so the plastic on plastic clip slipped into place easier. Simple repair. Parts were shipped fast and cost was good. New guide was in place and working less than 1 week after I ordered the part. Great and fast shipping. Would use this site again without hesitation.

Simply, removed covered took off parts, and replace on new part, rehooked replaced cover. It is a bit tedious removing the cover on the ice dispinser but it is slotted at top, sill pop off easily but be careful can break if you force it.

Ordered new crisper pan.


Just dropping you a note to say, Great Service!

I spent less that 10 minutes online (including a Google search for parts) ordering my replacement crisper drawer for my Whirlpool refrigerator .

I placed my order and shortly after noon (EDT) on Monday 8/1 had a confirmation of the order and then a notice by 4 pm that day that my part had shipped. The package arrived at noon today (Wed.8/3) by FED EX. Exactly what I needed.

Your site is easy to use and the pictures are very helpful...you even had a video of how to replace a “crisper drawer”! (I did not need it but thought how helpful that probably would be to some folks!) I will definitely keep you bookmarked in my computer and recommend you to others.


I wish all online companies functioned as well as you!

Terry W.



PS

Just for fun I spent a few minutes looking at the Whirlpool website trying to locate the same part and after 20 minutes of going in many different directions, gave up!

I used a sandpaper drum on my Dremel tool and ground about a millimeter off of the bottom tab tip. That allowed me to then push it through the slot and rotate it up and closed the top clips to complete the job.

The bracket that held the micro switch had broken, I had to replace the cover brace assembly. The job went smooth.

I pulled the broken shute out because one locking tab had broken. The front tab slipped out very easy. I slid the new piece into position by placing the front tab into position and press the two locking tab into place and it snapped on. Took about 3 minutes to do everything.

keep up the good work, real easy to exchange.

Just empied the old crisper pan into the new one after washing the new one out and i was done.

Removed top cover, then removed top hindge pin plate, then removed the door. Replaced the Lower Door Closing Cam, Reinstalled door and hindge pin plate and cover.

removed front of control to find the control board broken. The switch was working ,but the broken part of the board would not allow the switch to work.