ECS130 Dacor Wall Oven - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Two striped out screw heads
Purchased a screw extractor set from the local Ace Hardware (SpeedOut). Be sure and carefully follow the screw extractor instructions as written (counterclockwise turn). Removed old screws and replaced them with new screws supplied by PartSelect.
Parts Used:
-
David from MCKINNEY, TX
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
2 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the oven didn't heat up on bake
didn't know if this was going to fix it, but i ordered a bake element anyway from a very frendly and knowledgeable lady in nova scotia whom i couldn't talk into coming down here to install it for me, but when the element arrived, i removed the oven door and removed the two grates, removed 2 screws from the element in the back of the oven and pulled out the element. then hooked up the 2 wires to the new element and then had a slight problem getting the 2 screws reassembled, but got it done. pam prayed, and then baked some bread and it worked perfectly. i'm quite satisfied with one more problem solved!!! ready for the next one!!!
Parts Used:
-
Bob from Latrobe, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!