ECBP82WK2WW General Electric Range - Instructions

First I unplugged the range. Then I removed the hex head screws, disconnected the two flag connectors and removed the old element. Then I reversed the process with the new element. I plugged the range back in and set the control to broil. It works like a charm!

Parts arrived in record time and the right parts. The detailed diagram was so helpful in finding exactly the part I needed to order. Was so easy my girlfriend with no mechanical or electrical experience completely helped me through the entire project. She secured the electrical breaker to the range, and I had the top back to the oven removed. I showed her how the little white box simply slides off the lens cover, then replaced the new one in the holes and slide it back on. Secured the back and she turned on the breaker back on...and all lights work. Thanks for making this project easy, simple and quick.

Pulled unit away from wall with help of husband and followed instructions.

Repairs went well. By the way you guys rock! From the easiness of your website to receiving the part a day ahead of schedule! We are baking again.

Very simple fix, after unplugging the range to shut off power, there were two screws to remove on the inside of the oven, and also removed the panel from the back with only four short screws.. the fix was simple and cost a lot less than what I would have paid to purchase a new range... The part arrived shortly after the order was placed...

Remove one screw replace element and return the screw.

Repair was very easy - less than a few minutes - just had to screw in 2 screws to the new drawer supports.

Removed two screws holding the element in place, unhooked the spade connectors and inserted the new ones in their place; put the screws back in. Big deal.

removed back panel, removed 2 screws inside and unplugged element. Then reversed the process to finish.

Went super fast--very easy. Part fit perfectly and the installation was a snap.

replaced temp sensor and element. works great.the price of parts and ship time was great!!!!!!!!!!

Ordered part which arrived in 4 days. Removed range door (simple), removed shelves. With a power nut driver, removed support brackets holding element from top of oven. Removed screws holding element and temp probe at the rear of oven. Removed 2 wire connectors attached to element. Removed damaged element. Attached the replacement element to the 2 wire connectors and fed cables and probe wires back into the cable opening at the rear of the oven. Attached the new element to the top of the range with the existing screws. Attached the rear of the element with the temp probe with screws at the rear of the oven. Replaced range door. Plugged in power and tested for 15 minutes. Job complete. Parts price, great! Service call saved, priceless!

checked the voltage on baking element looked on line for part when it came in just replacled it. It was so simple

Removed the old element and installed the new one.

It was so easy I just unscrewed the back that was easier for me and inserted the wires and done!