ECBP82WJ2WW General Electric Range - Instructions

The only tool needed was a nutdriver to remove the lamp socket. I needed my head mounted light to see what I was doing, and everything went smoothly from there. Simple job.

Replaced.

When I removed the unit I failed to secure the clip on wires - AND zing they went back into the insulation - now it required pulling unit out removing the back panel and placing wires thru the insulation and back into the oven - job was then very simple

Turned off the power to the stove. Removed the oven door, Removed two screws holding the metal housing from the oven wall. pulled the assembly forward, removed the two electrical wires from the back of the socket, installed new gasket on back of metal assembly,inserted the wires thru the hole in the metal assembly, attached the wires to the new socket, pushed the new socket in place making sure the two holding clamps were in place, screwed assembly back in oven wall, replaced new bulb, replaced glass cover over bulb, Replaced oven door, turned the power back on, Light works like new.

Parts fit perfect, and order them on Wednesday and they were delivered on Friday morning. Excellent service. Thank you. Happy customer.

Unscrew the two nuts in the back of oven holding the bake element,carefully secure the electrical connections with plyers so they won't go back into the stove. Slowly, pull the bake element out of the electrical sockets, one at the time. Next insert the electrical parts into the new element ends, screw back the nuts, and done!

Removed the two racks, remove two screws from the back of heat element, carefully pull element out, unplugs wires from element, install new element in the reverse order

Moved the stove away from the wall and unplugged. Removed screws from the back of the stove. Took out old element and replaced with new. Replaced the screws, plugged the stove back in and turned on the oven to make sure everything was working. Everything working fine and I baked a cake. I was also very happy how quickly I received the part. I ordered it late Thursday afternoon and received it by the following Saturday morning. Thank you.

ordered it and it was here within 48 hours. I was so surprised to see it so quicly. It took me just a few minutes to put it n and tighten it up and all is well now. Piece of cake!

The part arrived the very next afternoon. My husband was at work, so I decided to give it a try. After reading other repair stories, I began by shutting off the breaker to the oven. Next, removed the racks. I then used a socket to remove the two screws on back plate. I then VERY CAREFULLY and slowly pulled out the element a short distance, just to see the connections. I used a magnetic refrigerator clip to hold onto the clip so it wouldn't go back into the insulation in the oven:(someone else suggested this---good suggestion) I slid off the connectors and slid them back onto the new element. Pushed it back in and put screws back on.

This website made it so easy for me to find the part I needed! Shipped promptly with no problems or delays and the rack fit perfectly in my oven.

Our son came to visit! The element was replaced in no time!

I did not separate out the wires that went to the left and the wires that went to the right when I removed the element. When I finished the repair the two days later after getting the proper bottom element ( the folks on the phone are great, much better than just figuring it our o form plan view in pictures), I blew out the oven control chip, it was spectacular!. Subsequently I disposed of this newly made oven sized paperweight and replaced it with a new oven, which upon reflection of my arts and crafts abilities, I should have done in the first place..

Installed new guides with a nut driver without any problems.

Dear PARTSELECT

My experience with you was spectacular!!!!

The oven broiler burner went out on a Sunday afternoon while my wife was using it to cook for our family dinner. We ordered it that day and it was received, installed, and working on Tuesday afternoon...



How could it be any better?



Thanks



George Crady